Department of Mechanical and Production Engineering

Aarhus University Seal
 Department of Mechanical and Production Engineering About the department Sections Design and Manufacturing Publications

Publications by Design and Manufacturing

Are you looking for publications by Section of Design and Manufacturing? On this page you can find all the publications made by the Section of Design and Manufacturing - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Yee, A. Z. H., Kwok, B., Ng, J., Loy, G. P., Ng, L. Y., Sng, J. R. H., Perrault, S., Lim, K. H. & Subburaj, K. (2025). Why Older Adults Integrate Digital Health Technology Into Their Everyday Lives: The Role of Basic Psychological Needs. Human Behavior and Emerging Technologies, 2025(1), Article 9711661. https://doi.org/10.1155/hbe2/9711661
Vernica, T., Glišić, M., Veluri, B. & Ramanujan, D. (2023). Volumetric mapping and visualization of life cycle assessment results on computer-aided design models. Journal of Cleaner Production, 418, Article 138035. https://doi.org/10.1016/j.jclepro.2023.138035
Eheliyagoda, D., Veluri, B., Liu, G. & Ramanujan, D. (2025). Unveiling the multiregional circular economy pathways for global dysprosium constraints. Resources, Conservation and Recycling, 215, Article 108121. https://doi.org/10.1016/j.resconrec.2024.108121
Strack, D., Dieckmeyer, M., Sollmann , N., Kirschke , J. S. & Karupppasamy, S. (2025). Unexpectedly Higher Finite Element-Derived Strength in Fractured Vertebrae: Insights from a Retrospective Study. Abstract from Annual Meeting of the American Society of Bone and Mineral Research, Seattle, Washington, United States. https://doi.org/10.13140/RG.2.2.18868.72321
Feng, H., Gomes, C., Sandberg, M., Macedo, H. D. & Larsen, P. G. (2022). Under What Conditions Does a Digital Shadow Track a Periodic Linear Physical System? In A. Cerone, M. Autili, A. Bucaioni, C. Gomes, P. Graziani, M. Palmieri, M. Temperini & G. Venture (Eds.), Software Engineering and Formal Methods. SEFM 2021 Collocated Workshops - CIFMA, CoSim-CPS, OpenCERT, ASYDE, Revised Selected Papers (pp. 143-155). Springer. https://doi.org/10.1007/978-3-031-12429-7_11
Kaur, S., Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Understanding User Experience: Exploration of Various Definitions Using Natural Language Process. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society: Proceedings of ICoRD 2025 (Vol. 4, pp. 231-241). Springer. https://doi.org/10.1007/978-981-96-5495-6_18
Sandhu, K., Sarkar, P. & Karupppasamy, S. (2025). Understanding entrepreneurial thinking for designers: Perspectives from entrepreneurs, academicians, product designers, and students. Thinking Skills and Creativity, 56, Article 101728. https://doi.org/10.1016/j.tsc.2024.101728
Eheliyagoda, D., Ramanujan, D., Veluri, B., Liu, Q. & Liu, G. (2023). Tracing the multiregional evolution of the global dysprosium demand-supply chain. Resources, Conservation & Recycling, 199, Article 107245. https://doi.org/10.1016/j.resconrec.2023.107245
Aher, G. R., Boudjadar, J. & Ramanujan, D. (2023). Towards Simulation-Based Circular Product Design. Procedia CIRP, 116, 690-695. https://doi.org/10.1016/j.procir.2023.02.116
Mirzaiee, R., Vernica, T., Scheuringer, K. & Bernstein, W. Z. (2022). Towards Retargetable Animations for Industrial Augmented Reality. In Proceedings - 2022 IEEE Conference on Virtual Reality and 3D User Interfaces Abstracts and Workshops, VRW 2022 (pp. 872-873). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/VRW55335.2022.00287
Hejlskov Hansen, M., Vernica, T., Mansour, R. & Ramanujan, D. (2024). Three-Dimensional Visualization of Energy Consumption Data in Additive Manufacturing. In 44th Computers and Information in Engineering Conference (CIE): 44th Computers and Information in Engineering Conference (CIE) (Vol. 2A). Article V02AT02A046 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143405
Ramanujan, D., Bernstein, W. Z., Diaz-Elsayed, N. & R. Haapala, K. (2023). The Role of Industry 4.0 Technologies in Manufacturing Sustainability Assessment. Journal of Manufacturing Science and Engineering, 145(1), Article 010801. https://doi.org/10.1115/1.4055661
Lerchl, T., Strack, D., Allaire, B., Yee, E., Scott, R., Nispel, K., Moeller, H., Graf, R., Karupppasamy, S., Kirschke , J. S., Bouxsein, M. L. & Anderson, D. E. (2025). THE EFFECTS OF PREVALENT VERTEBRAL FRACTURES ON SPINAL BIOMECHANICS. Abstract from 20th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Barcelona, Spain. https://www.researchgate.net/publication/397941200_THE_EFFECTS_OF_PREVALENT_VERTEBRAL_FRACTURES_ON_SPINAL_BIOMECHANICS
Aher, G. R., Macedo, H. D., Larsen, P. G. & Ramanujan, D. (2023). Supporting Design for Circular Economy Using Lifecycle Co-Simulation. In ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Design for Manufacturing and the Life Cycle Conference (DFMLC) Article DETC2023-116537, V005T05A006; American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2023-116537
Karupppasamy, S., Singh, S., Ćuković, S., Sandhu, K., Meixner, G. & Petruse, R. E. (Eds.) (2024). Smart VR/AR/MR Systems for Professionals. CRC Press. https://doi.org/10.1201/9781003306078
Efeoǧlu, A. & Moller, C. (2023). Redesigning design thinking for codesign with nondesigners: a method efficiency perspective. Design Science, 9, Article e14. https://doi.org/10.1017/dsj.2023.11
Alzweighi, M., Mansour, R., Maass, A., Hirn, U. & Kulachenko, A. (2024). Predicting moisture penetration dynamics in paper with machine learning approach. International Journal of Solids and Structures, 288, Article 112602. https://doi.org/10.1016/j.ijsolstr.2023.112602
Karupppasamy, S. (2025). Pragmatic customization in medical device design for sustainable healthcare. In P. Kyratsis, A. Manavis & P. J. Davim (Eds.), CAD/CAM: Computer-Aided Design and Manufacturing, (pp. 143). De Gruyter. https://doi.org/10.1515/9783111585062-007
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Particle Flow and Printing Path Effects in SLS. Abstract from EPF European Polymer Congress, Groningen, Netherlands.
Strack, D., Manohar Rayudu, N., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2024). OPTIMIZING PATIENT-SPECIFIC BONE FINITE ELEMENT ANALYSIS: MESH CONVERGENCE AND MATERIAL GROUPING STRATEGIES. Orthopaedic Proceedings, 127. https://doi.org/10.1302/1358-992X.2024.18.127
Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Article 104396. https://doi.org/10.1016/j.addma.2024.104396
Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract from EPF European Polymer Congress, Groningen, Netherlands.
Abbiati, G., Gomes, C., Sandberg, M., Kazemi, Z., Hansen, S. T. & Larsen, P. G. (2024). Modelling for Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 89-127). Springer. https://doi.org/10.1007/978-3-031-66719-0_5
Šeta, B., Sandberg, M., Brander, M., Tusher Mollah, M., Pokkalla, D., Kumar, V. & Spangenberg, J. (2023). Modeling fiber orientation and strand shape morphology in three-dimensional material extrusion additive manufacturing. Composites Part B: Engineering, 266, Article 110957. https://doi.org/10.1016/j.compositesb.2023.110957
Kristensen, C. K., Kirkegaard, J., Sanporean, C.-G., Budzik, M. K. & Sandberg, M. (2025). Mitigating Discoloration in PA11 SLS: Experimental DoE and Novel Simulation Approaches.
Binedell, T., Gupta, U., Sithanathan, B., Karupppasamy, S. & Blessing, L. (2023). Mapping lines of non-extension in persons with lower limb amputation to aid comfort-driven prosthetic socket design. Medical Engineering & Physics, 118, Article 104018. https://doi.org/10.1016/j.medengphy.2023.104018
Bodden, J., Dieckmeyer, M., Sollmann , N., Rühling, S., Prucker, P., T. Löffler, M., Burian, E., Karupppasamy, S., Zimmer, C., Kirschke , J. S. & Baum, T. (2023). Long-term reproducibility of opportunistically assessed vertebral bone mineral density and texture features in routine clinical multi-detector computed tomography using an automated segmentation framework. Quantitative Imaging in Medicine and Surgery (QIMS), 13(9), 5472-5482. https://doi.org/10.21037/qims-23-19
Vernica, T., Aher, G. R., Veluri, B. & Ramanujan, D. (2023). LCAD: A Framework for Coupling Computer-Aided Design and Life Cycle Analysis Visualizations. In ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Design for Manufacturing and the Life Cycle Conference (DFMLC) Article DETC2023-116573, V005T05A007; American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2023-116573
Borbolla Muñoz, A., Nezar Aboujarra, M. & Ramanujan, D. (2024). Investigating Sustainable Production Planning of an Industrial Progressive Die Stamping Process Using Discrete Event Simulation. In 29th Design for Manufacturing and the Life Cycle Conference (DFMLC): 29th Design for Manufacturing and the Life Cycle Conference (DFMLC) (Vol. 5). Article V005T05A006 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143648
Sandhu, K., Singh, G., Subburaj, K., Sarkar, P. & Pal, M. (2025). Introduction. In Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques (pp. 3-6). Elsevier. https://doi.org/10.1016/B978-0-443-26751-2.00025-3
Strack, D., Mesbah, M., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2025). Interpatient variability and validation of simplified L4-L5 Finite Element Model. Abstract from The XXX Congress of the International Society of Biomechanics , Stockholm, Sweden. https://www.researchgate.net/publication/395188992_Interpatient_variability_and_validation_of_simplified_L4-L5_Finite_Element_Model
Feng, H., Gomes, C., Gil Arboleda, S., Mikkelsen, P. H., Tola, D., Larsen, P. G. & Sandberg, M. (2022). Integration Of The Mape-K Loop In Digital Twins. In C. R. Martin, N. Emami, M. J. Blas & R. Rezaee (Eds.), Proceedings of the 2022 Annual Modeling and Simulation Conference, ANNSIM (pp. 102-113). IEEE. https://doi.org/10.23919/ANNSIM55834.2022.9859489
Aher, G., Sandberg, M., Boudjadar, J. & Ramanujan, D. (2025). Informing circularity-focused design optimization using parametric life-cycle engineering simulation models. Smart and Sustainable Manufacturing Systems, 9(1), 11-36. https://doi.org/10.1520/SSMS20240018
Mansour, R., Enblom, P., Subasic, M., Ireland, A., Gustavsson, F., Forssgren, B. & Efsing, P. (2025). Influence of temperature-dependent viscoplastic relaxation and strain-induced martensitic transformation on the fatigue life of 304L stainless steel. International Journal of Fatigue, 198, Article 108992. https://doi.org/10.1016/j.ijfatigue.2025.108992
Zambrano, V., Mueller-Roemer, J., Sandberg, M., Talasila, P., Zanin, D., Larsen, P. G., Loeschner, E., Thronicke, W., Pietraroia, D., Landofi, G., Fontana, A., Laspalas, M., Antony, J., Poser, V., Kiss, T., Bergweiler, S., Pena Serna, S., Izquierdo, S., Viejo, I. ... Stork, A. (2022). Industrial Digitalization in the Industry 4.0 era: Classification, Reuse and Authoring of Digital Models on Digital Twin Platforms. Array, 14, Article 100176. https://doi.org/10.1016/j.array.2022.100176
Wang, C., Cong, D., Tang, G., Zhou, X. & Li, J. (2024). Improving thermoelectric properties in double half-Heusler M8FexNi8−xSb8 (M = TiZrHfNb)-InSb compounds via synergistic multiscale defects and high-mobility carrier injection. Chemical Engineering Journal, 496, Article 154313. https://doi.org/10.1016/j.cej.2024.154313
Strack, D., Mesbah, M., Manohar Rayudu, N., Baum, T., Kirschke , J. S. & Karupppasamy, S. (2024). IMPACT OF ANNULUS FIBROSUS STIFFNESS ON THE FRACTURE LOAD OF FUNCTIONAL SPINE UNITS. Orthopaedic Proceedings, 102. https://doi.org/10.1302/1358-992X.2024.18.102
Kunrath, K., Leka, S., Abu-Ghaida, H. & Ramanujan, D. (2021). IDENTIFYING INDUSTRY NEEDS FOR INNOVATION SKILLS IN ENGINEERING EDUCATION: A THEMATIC ANALYSIS OF CASES FROM DANISH INDUSTRY. 306-315. Paper presented at SEFI 49th Annual Conference: Blended Learning in Engineering Education: Challenging, Enlightening - and Lasting?, Berlin, Virtual, Germany.
Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Identification of Skills for Entrepreneurial Thinking Using Natural Language Processing: An Exploration of Entrepreneurs, Faculties Members and Design Students. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society - Proceedings of ICoRD 2025 (Vol. 4, pp. 255-266). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-981-96-5495-6_20
Kumar , R., Sandhu, K., Ranjan, N., Singh, S., Sarkar, P., Karupppasamy, S. & Ramakrishna, S. (2023). Form exploration on different fabrics using material extrusion based additive manufacturing and end users experience. Journal of Manufacturing Processes, 101, 959-973. https://doi.org/10.1016/j.jmapro.2023.06.053
Sandhu, K., Karupppasamy, S., Pal, M., Sarkar, P. & Singh, S. (Eds.) (2025). Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques. (1 ed.) Elsevier, Academic Press. https://doi.org/10.1016/C2023-0-52605-9
Sandberg, M., Hattel, J. H. & Spangenberg, J. (2023). Flow‑Induced Fibre Compaction in Resin‑Injection Pultrusion. Transport in Porous Media, 147(3), 541-571. https://doi.org/10.1007/s11242-023-01911-x
Hesse, N., Strack, D., Rischewski, J. F., Gassert, F. T., Kufner, A., Urban, T., Lochschmidt, M. E., Schwaiger, B. J., Braun, C., Mueller, D. P., Pfeiffer, D., Baum, T., Subburaj, K., Pfeiffer, F. & Gersing, A. S. (2025). Finite element fracture load analysis and dark-field X-ray imaging of osteoporotic and healthy vertebrae in human lumbar spine specimens. BMC Musculoskeletal Disorders, 26(1), Article 545. https://doi.org/10.1186/s12891-025-08709-6
Pedersen, M. M. (2015). Fatlab: Free open-source fatigue analysis software. http://www.fatiguetoolbox.org
Subasic, M., Olsson, M., Dadbakhsh, S., Zhao, X., Krakhmale, P. & Mansour, R. (2024). Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading. International Journal of Fatigue, 180, Article 108077. https://doi.org/10.1016/j.ijfatigue.2023.108077
Rygg Johnsen, A., Petersen, J. E., Pedersen, M. M. & Yildirim, H. C. (2024). Factors affecting the fatigue strength of additively manufactured Ti-6Al-4V parts. Welding in the World, 68(2), 361-409. https://doi.org/10.1007/s40194-023-01604-5
Subasic, M., Ireland, A., Mansour, R., Enblom, P., Krakhmalev, P., Åsberg, M., Fazi, A., Gårdstam, J., Shipley, J., Waernqvist, P., Forssgren, B. & Efsing, P. (2024). Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel. International Journal of Plasticity, 176, Article 103966. https://doi.org/10.1016/j.ijplas.2024.103966
Friis, S. J., Strøm Hansen, T., Olesen, C. G., Poulsen, M., Gregersen, H. & Nygaard, J. V. (2025). Experimental and numerical study of solid needle insertions into human stomach tissue. Journal of the Mechanical Behavior of Biomedical Materials, 162, Article 106832. https://doi.org/10.1016/j.jmbbm.2024.106832
Eheliyagoda, D., Veluri, B., Ramanujan, D. & Liu, G. (2023). Examining three decades of global dysprosium supply chain through a material flow analysis. In First IRTC conference: Raw materials for a sustainable future (pp. 20)
Formentini, G. & Ramanujan, D. (2023). EXAMINING THE ROLE AND FUTURE POTENTIAL OF DESIGN FOR DISASSEMBLY METHODS TO SUPPORT CIRCULAR PRODUCT DESIGN. Proceedings of the Design Society , 3, 1735 - 1744. https://doi.org/10.1017/pds.2023.174

Displaying results 1 to 50 out of 75

1

2

Next

Revised 13.11.2025
-
AU Engineering