Department of Mechanical and Production Engineering

Aarhus University Seal
 Department of Mechanical and Production Engineering About the department Sections Design and Manufacturing Publications

Publications by Design and Manufacturing

Are you looking for publications by Section of Design and Manufacturing? On this page you can find all the publications made by the Section of Design and Manufacturing - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Zambrano, V., Mueller-Roemer, J., Sandberg, M., Talasila, P., Zanin, D., Larsen, P. G., Loeschner, E., Thronicke, W., Pietraroia, D., Landofi, G., Fontana, A., Laspalas, M., Antony, J., Poser, V., Kiss, T., Bergweiler, S., Pena Serna, S., Izquierdo, S., Viejo, I. ... Stork, A. (2022). Industrial Digitalization in the Industry 4.0 era: Classification, Reuse and Authoring of Digital Models on Digital Twin Platforms. Array, 14, Article 100176. https://doi.org/10.1016/j.array.2022.100176
Yee, A. Z. H., Kwok, B., Ng, J., Loy, G. P., Ng, L. Y., Sng, J. R. H., Perrault, S., Lim, K. H. & Subburaj, K. (2025). Why Older Adults Integrate Digital Health Technology Into Their Everyday Lives: The Role of Basic Psychological Needs. Human Behavior and Emerging Technologies, 2025(1), Article 9711661. https://doi.org/10.1155/hbe2/9711661
Wang, C., Cong, D., Tang, G., Zhou, X. & Li, J. (2024). Improving thermoelectric properties in double half-Heusler M8FexNi8−xSb8 (M = TiZrHfNb)-InSb compounds via synergistic multiscale defects and high-mobility carrier injection. Chemical Engineering Journal, 496, Article 154313. https://doi.org/10.1016/j.cej.2024.154313
Volk, M., Yuksel, O., Baran, I., Hattel, J. H., Spangenberg, J. & Sandberg, M. (2022). Cost-efficient, automated, and sustainable composite profile manufacture: A review of the state of the art, innovations, and future of pultrusion technologies. Composites Part B: Engineering, 246, Article 110135. https://doi.org/10.1016/j.compositesb.2022.110135
Vernica, T., Glišić, M., Veluri, B. & Ramanujan, D. (2023). Volumetric mapping and visualization of life cycle assessment results on computer-aided design models. Journal of Cleaner Production, 418, Article 138035. https://doi.org/10.1016/j.jclepro.2023.138035
Vernica, T., Aher, G. R., Veluri, B. & Ramanujan, D. (2023). LCAD: A Framework for Coupling Computer-Aided Design and Life Cycle Analysis Visualizations. In ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Design for Manufacturing and the Life Cycle Conference (DFMLC) Article DETC2023-116573, V005T05A007; American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2023-116573
Velu, R., Karupppasamy, S. & Kumar Subramaniyan, A. K. (Eds.) (2024). Digital Design and Manufacturing of Medical Devices and Systems. (1 ed.) Springer. https://doi.org/10.1007/978-981-99-7100-8
Szemeti, G. & Ramanujan, D. (2022). An Empirical Benchmark for Resource Use in Fused Deposition Modelling 3D Printing of Isovolumetric Mechanical Components. Procedia CIRP, 105, 183-191. https://doi.org/10.1016/j.procir.2022.02.030
Sutton, M., Daniels, J., Masoudi, N., Gorsich, D. & Turner, C. (2024). Approaches for exploration, analysis, and visualization of tradespace for engineering decision-making. Proceedings of the Design Society , 4, 3023-3032. https://doi.org/10.1017/pds.2024.306
Subasic, M., Olsson, M., Dadbakhsh, S., Zhao, X., Krakhmale, P. & Mansour, R. (2024). Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading. International Journal of Fatigue, 180, Article 108077. https://doi.org/10.1016/j.ijfatigue.2023.108077
Subasic, M., Ireland, A., Mansour, R., Enblom, P., Krakhmalev, P., Åsberg, M., Fazi, A., Gårdstam, J., Shipley, J., Waernqvist, P., Forssgren, B. & Efsing, P. (2024). Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel. International Journal of Plasticity, 176, Article 103966. https://doi.org/10.1016/j.ijplas.2024.103966
Strack, D., Manohar Rayudu, N., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2024). OPTIMIZING PATIENT-SPECIFIC BONE FINITE ELEMENT ANALYSIS: MESH CONVERGENCE AND MATERIAL GROUPING STRATEGIES. Orthopaedic Proceedings, 127. https://doi.org/10.1302/1358-992X.2024.18.127
Strack, D., Mesbah, M., Manohar Rayudu, N., Baum, T., Kirschke , J. S. & Karupppasamy, S. (2024). IMPACT OF ANNULUS FIBROSUS STIFFNESS ON THE FRACTURE LOAD OF FUNCTIONAL SPINE UNITS. Orthopaedic Proceedings, 102. https://doi.org/10.1302/1358-992X.2024.18.102
Strack, D., Mesbah, M., Kirschke , J. S. & Karupppasamy, S. (2025). Biomechanical Alterations Following Vertebral Fracture: A Patient-Specific L3-L5 Finite Element Analysis. Abstract from World Congress of Orthopaedic Research, Adelaide, South Australia, Australia. https://doi.org/10.13140/RG.2.2.28212.10884
Strack, D., Dieckmeyer, M., Sollmann , N., Kirschke , J. S. & Karupppasamy, S. (2025). Unexpectedly Higher Finite Element-Derived Strength in Fractured Vertebrae: Insights from a Retrospective Study. Abstract from Annual Meeting of the American Society of Bone and Mineral Research, Seattle, Washington, United States. https://doi.org/10.13140/RG.2.2.18868.72321
Strack, D., Mesbah, M., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2025). Interpatient variability and validation of simplified L4-L5 Finite Element Model. Abstract from The XXX Congress of the International Society of Biomechanics , Stockholm, Sweden. https://www.researchgate.net/publication/395188992_Interpatient_variability_and_validation_of_simplified_L4-L5_Finite_Element_Model
Srinivasan, V., Song, B., Luo, J., Karupppasamy, S., Elara Mohan, R., Blessing, L. & Wood, K. (2023). Do Analogies and Analogical Distance Influence Ideation Outcomes in Engineering Design? In S. Mukherjee, V. Dutt & N. Srinivasan (Eds.), Applied Cognitive Science and Technology: Implications of Interactions Between Human Cognition and Technology (pp. 211–230). Springer. https://doi.org/10.1007/978-981-99-3966-4_13
Šeta, B., Sandberg, M., Brander, M., Tusher Mollah, M., Pokkalla, D., Kumar, V. & Spangenberg, J. (2023). Modeling fiber orientation and strand shape morphology in three-dimensional material extrusion additive manufacturing. Composites Part B: Engineering, 266, Article 110957. https://doi.org/10.1016/j.compositesb.2023.110957
Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Article 104396. https://doi.org/10.1016/j.addma.2024.104396
Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Identification of Skills for Entrepreneurial Thinking Using Natural Language Processing: An Exploration of Entrepreneurs, Faculties Members and Design Students. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society - Proceedings of ICoRD 2025 (Vol. 4, pp. 255-266). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-981-96-5495-6_20
Sandhu, K., Singh, G., Subburaj, K., Sarkar, P. & Pal, M. (2025). Introduction. In Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques (pp. 3-6). Elsevier. https://doi.org/10.1016/B978-0-443-26751-2.00025-3
Sandhu, K., Sarkar, P. & Karupppasamy, S. (2025). Understanding entrepreneurial thinking for designers: Perspectives from entrepreneurs, academicians, product designers, and students. Thinking Skills and Creativity, 56, Article 101728. https://doi.org/10.1016/j.tsc.2024.101728
Sandhu, K., Karupppasamy, S., Pal, M., Sarkar, P. & Singh, S. (Eds.) (2025). Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques. (1 ed.) Elsevier, Academic Press. https://doi.org/10.1016/C2023-0-52605-9
Sandberg, M., Hattel, J. H. & Spangenberg, J. (2023). Flow‑Induced Fibre Compaction in Resin‑Injection Pultrusion. Transport in Porous Media, 147(3), 541-571. https://doi.org/10.1007/s11242-023-01911-x
Rygg Johnsen, A., Petersen, J. E., Pedersen, M. M. & Yildirim, H. C. (2024). Factors affecting the fatigue strength of additively manufactured Ti-6Al-4V parts. Welding in the World, 68(2), 361-409. https://doi.org/10.1007/s40194-023-01604-5
Ramanujan, D., Bernstein, W. Z., Diaz-Elsayed, N. & R. Haapala, K. (2023). The Role of Industry 4.0 Technologies in Manufacturing Sustainability Assessment. Journal of Manufacturing Science and Engineering, 145(1), Article 010801. https://doi.org/10.1115/1.4055661
Pedersen, M. M. (2015). Fatlab: Free open-source fatigue analysis software. http://www.fatiguetoolbox.org
Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract from EPF European Polymer Congress, Groningen, Netherlands.
Oakes, B. J., Zhang, H., Hatledal, L. I., Feng, H., Frasheri, M., Sandberg, M., Gil Arboleda, S. & Gomes, C. (2024). Case Studies in Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 257-310). Springer. https://doi.org/10.1007/978-3-031-66719-0_12
Mirzaiee, R., Vernica, T., Scheuringer, K. & Bernstein, W. Z. (2022). Towards Retargetable Animations for Industrial Augmented Reality. In Proceedings - 2022 IEEE Conference on Virtual Reality and 3D User Interfaces Abstracts and Workshops, VRW 2022 (pp. 872-873). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/VRW55335.2022.00287
Mansour, R., Enblom, P., Subasic, M., Ireland, A., Gustavsson, F., Forssgren, B. & Efsing, P. (2025). Influence of temperature-dependent viscoplastic relaxation and strain-induced martensitic transformation on the fatigue life of 304L stainless steel. International Journal of Fatigue, 198, Article 108992. https://doi.org/10.1016/j.ijfatigue.2025.108992
Li, J., Zhou, X., Brochu, M., Chekir, N., Sixsmith, J. J. & Zhao, Y. F. (2025). Crystal introducing mechanism in laser wire directed energy deposition fabricated Ti6Al4V. Progress in Additive Manufacturing, 10(2), 1231-1241. https://doi.org/10.1007/s40964-024-00701-1
Lerchl, T., Strack, D., Allaire, B., Yee, E., Scott, R., Nispel, K., Moeller, H., Graf, R., Karupppasamy, S., Kirschke , J. S., Bouxsein, M. L. & Anderson, D. E. (2025). THE EFFECTS OF PREVALENT VERTEBRAL FRACTURES ON SPINAL BIOMECHANICS. Abstract from 20th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Barcelona, Spain. https://www.researchgate.net/publication/397941200_THE_EFFECTS_OF_PREVALENT_VERTEBRAL_FRACTURES_ON_SPINAL_BIOMECHANICS
Kunrath, K., Leka, S., Abu-Ghaida, H. & Ramanujan, D. (2021). IDENTIFYING INDUSTRY NEEDS FOR INNOVATION SKILLS IN ENGINEERING EDUCATION: A THEMATIC ANALYSIS OF CASES FROM DANISH INDUSTRY. 306-315. Paper presented at SEFI 49th Annual Conference: Blended Learning in Engineering Education: Challenging, Enlightening - and Lasting?, Berlin, Virtual, Germany.
Kunrath, K., Leka, S., Vestergaard, L. S., Presser, M. & Ramanujan, D. (2024). A Digital Tool for Scaffolding Innovation Learning in Engineering Education with Local Industry Needs. International Journal of Engineering Education, 40(4), 801-814.
Kumar , R., Sandhu, K., Ranjan, N., Singh, S., Sarkar, P., Karupppasamy, S. & Ramakrishna, S. (2023). Form exploration on different fabrics using material extrusion based additive manufacturing and end users experience. Journal of Manufacturing Processes, 101, 959-973. https://doi.org/10.1016/j.jmapro.2023.06.053
Kristensen, C. K., Kirkegaard, J., Sanporean, C.-G., Budzik, M. K. & Sandberg, M. (2025). Mitigating Discoloration in PA11 SLS: Experimental DoE and Novel Simulation Approaches.
Kaur, S., Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Understanding User Experience: Exploration of Various Definitions Using Natural Language Process. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society: Proceedings of ICoRD 2025 (Vol. 4, pp. 231-241). Springer. https://doi.org/10.1007/978-981-96-5495-6_18
Karupppasamy, S., Singh, S., Ćuković, S., Sandhu, K., Meixner, G. & Petruse, R. E. (Eds.) (2024). Smart VR/AR/MR Systems for Professionals. CRC Press. https://doi.org/10.1201/9781003306078
Karupppasamy, S. (2025). Pragmatic customization in medical device design for sustainable healthcare. In P. Kyratsis, A. Manavis & P. J. Davim (Eds.), CAD/CAM: Computer-Aided Design and Manufacturing, (pp. 143). De Gruyter. https://doi.org/10.1515/9783111585062-007
Kabachi, M. A., Sandberg, M. & Ermanni, P. (2025). Combined experimental–numerical approach for through-thickness unsaturated permeability characterization of deformable fiber-beds. Composite Structures, 371, Article 119396. https://doi.org/10.1016/j.compstruct.2025.119396
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Efficient continuum-based modelling and analysis of polymer SLS: Insights into particle sintering and densification in straight and corner scanning passes. Additive Manufacturing, 109, Article 104828. https://doi.org/10.1016/j.addma.2025.104828
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Particle Flow and Printing Path Effects in SLS. Abstract from EPF European Polymer Congress, Groningen, Netherlands.
Hesse, N., Strack, D., Rischewski, J. F., Gassert, F. T., Kufner, A., Urban, T., Lochschmidt, M. E., Schwaiger, B. J., Braun, C., Mueller, D. P., Pfeiffer, D., Baum, T., Subburaj, K., Pfeiffer, F. & Gersing, A. S. (2025). Finite element fracture load analysis and dark-field X-ray imaging of osteoporotic and healthy vertebrae in human lumbar spine specimens. BMC Musculoskeletal Disorders, 26(1), Article 545. https://doi.org/10.1186/s12891-025-08709-6
Hejlskov Hansen, M., Vernica, T., Mansour, R. & Ramanujan, D. (2024). Three-Dimensional Visualization of Energy Consumption Data in Additive Manufacturing. In 44th Computers and Information in Engineering Conference (CIE): 44th Computers and Information in Engineering Conference (CIE) (Vol. 2A). Article V02AT02A046 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143405
He, L., Wang, C., Zhang, M., Li, J., Chen, T. & Zhou, X. (2025). Design of BCC/FCC dual-solid solution refractory high-entropy alloys through CALPHAD, machine learning and experimental methods. npj Computational Materials, 11(1), Article 105. https://doi.org/10.1038/s41524-025-01597-3
Glisic, M., Sarfraz, S., Veluri, B. & Ramanujan, D. (2022). A Systematic Framework for Quantifying Production System-Specific Challenges in Life Cycle Inventory Data Collection. Procedia CIRP, 105, 210-218. https://doi.org/10.1016/j.procir.2022.02.035
Glisic, M., Veluri, B. & Ramanujan, D. (2024). A Bottom-Up Methodology for Identifying Key Performance Indicators for Sustainability Monitoring of Unit Manufacturing Processes. Sustainability, 16(2), Article 806. https://doi.org/10.3390/su16020806
Glisic, M., Møller, C., Veluri, B. & Ramanujan, D. (2024). Digital Process Passport: A Conceptual Model for Information Collection and Sharing In Sustainable Manufacturing. Procedia CIRP, 130(27), 1077-1083. https://doi.org/10.1016/j.procir.2024.10.209
Friis, S. J., Strøm Hansen, T., Olesen, C. G., Poulsen, M., Gregersen, H. & Nygaard, J. V. (2025). Experimental and numerical study of solid needle insertions into human stomach tissue. Journal of the Mechanical Behavior of Biomedical Materials, 162, Article 106832. https://doi.org/10.1016/j.jmbbm.2024.106832

Displaying results 1 to 50 out of 75

1

2

Next

Revised 13.11.2025
-
AU Engineering