Department of Mechanical and Production Engineering

Aarhus University Seal
 Department of Mechanical and Production Engineering About the department Sections Publications

Publications by Design and Manufacturing

Are you looking for publications by Section of Design and Manufacturing? On this page you can find all the publications made by the Section of Design and Manufacturing - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Kondrup, N., Thomsen, C. L., Yang, X. & Zhang, X. (2026). An Automated Control Unit for PFAS Degradation in UV-ARP Flow Reactors Using Model Predictive Control. In 12th International Conference on Automation, Robotics and Applications (ICARA) (pp. 463-470). IEEE. https://doi.org/10.1109/ICARA69401.2026.11480299
Wang, C., Zhang, M., He, L., Kan, S., Song, R., Zhao, D., Li, J., Cong, D. & Zhou, X. (2026). Balancing the Competing Effects of Carrier and Phonon Transport Mechanisms to Enhance the Thermoelectric Properties of p-Type Ti2Zr2−xHf2Nb2Fe5.6Ni2.4Sb8 Double Half-Heusler Alloys via Cation Vacancy Engineering. Energy and Environmental Materials, 9(2), Article e70170. https://doi.org/10.1002/eem2.70170
Strack, D., Chundi, G., Rehtanz, N., Soltani, Z., Pieper, S. D., Pinter, C., Subburaj, K. & Alkalay, R. N. (2026). BoneMesh: An open-source 3D slicer framework for automated mesh generation and material mapping from CT to finite elements. Computer Methods and Programs in Biomedicine, 281, Article 109344. https://doi.org/10.1016/j.cmpb.2026.109344
Mugge, R., Haase, L. M., Jaeger-Erben, M., Nhu Laursen, L., Niinimäki , K., Richter, J., Sprecher, B. & Watkins, M. (2026). Editorial: Product lifetimes and the environment: Retaining product value in a circular economy. Resources, Conservation & Recycling, 225, Article 108617. https://doi.org/10.1016/j.resconrec.2025.108617
Mosgaard, M. A., Bundgaard, A. M. & Haase, L. M. (2026). How Engagement Drives Circularity: Evidence from Eight Danish Construction Companies Extending Material and Product Lifespans. Journal of Sustainable Development of Energy, Water and Environment Systems, 14(3), Article 1140700. https://doi.org/10.13044/j.sdewes.d14.0700
Durocher, H., Bachmann, C., Mozzillo, R., Janeschitz, G. & Zhang, X. (2026). Inverse Kinematics and Statics-Based Motion Planning of a 7-DoF Transporter for DEMO-Type Breeding Blankets. Machines, 14(5), Article 469. https://doi.org/10.3390/machines14050469
He, L., Zhang, M., Wang, P., Li, J., Wang, H., Wang, Y., Ye, X., Yan, X., Zhou, S., Liu, S., Zhao, P. & Zhou, X. (2026). Laser melting deposition of dual-phase tungsten-based refractory high-entropy alloys: Face-centered cubic-driven strength and ductility synergy revealed by first-principles calculations. Journal of Materials Science and Technology, 265, 100-111. https://doi.org/10.1016/j.jmst.2025.12.033
Durocher, H., Bachmann, C., Mozzillo, R., Janeschitz, G. & Zhang, X. (2026). Multibody Dynamics with Joint Modeling and Trajectory Optimization for the Breeding Blanket Vertical Transporter Robot. Fusion Engineering and Design, 229, Article 115788. https://doi.org/10.1016/j.fusengdes.2026.115788
Strack, D., Nispel, K., Kirschke, J. S. & Subburaj, K. (2026). PBMGA-python-based bone material grouping and anisotropy, a software tool to automatically assign advanced material properties. Medical engineering & physics, 147(5). https://doi.org/10.1088/1873-4030/ae5a3f
Abedi, M., Chang, A., Hassan, H. I., Yang, A., Hickethier, M. L., Bushagour, A. H., Aghajari, M., Stoerzinger, K. A., Layton, A., Abbasi, B., Chang, C. H. & Feng, Z. (2026). Recovering Critical Metals from Brines: Technology Landscape, Circular Economy, and Future Trends. ACS Applied Energy Materials, 9(4), 2005-2034. https://doi.org/10.1021/acsaem.5c03407
Strack, D., Manohar Rayudu, N., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2026). Reduction of material groups for vertebral bone finite element simulation: cross comparison of grouping methods. Computer Methods in Biomechanics and Biomedical Engineering, 29(5), 941-951. https://doi.org/10.1080/10255842.2024.2422901
Šeta, B., Brander, M., Sandberg, M., Mollah, M. T., Kumar, V. & Spangenberg, J. (2026). Subvoxel Control of Fiber Orientation via Multidirectional Shearing in 3D Printing. Advanced Science, 13(9), Article e11008. https://doi.org/10.1002/advs.202511008
Jha, A. K., Jha, A. K., Airao, J. & Khanna, N. (2025). Advanced Machine Learning for Predicting Tool Wear and Tool Life: A Comprehensive Analysis Using Classification and Regression Techniques. In Recent Trends in Material Processing, Characterization and Applications (pp. 405-422). Springer. https://doi.org/10.1007/978-981-96-5856-5_31
Formentini, G., Prioli, J. PJ., Ko, J., Hapuwatte, B., Ferrero, V., Badurdeen, F., Rickli, J. L. & Ramanujan, D. (2025). A review of disassembly systems for circular product design. Journal of Cleaner Production, 506, Article 145459. https://doi.org/10.1016/j.jclepro.2025.145459
Strack, D., Mesbah, M., Kirschke , J. S. & Karupppasamy, S. (2025). Biomechanical Alterations Following Vertebral Fracture: A Patient-Specific L3-L5 Finite Element Analysis. Abstract from World Congress of Orthopaedic Research, Adelaide, South Australia, Australia. https://doi.org/10.13140/RG.2.2.28212.10884
Kabachi, M. A., Sandberg, M. & Ermanni, P. (2025). Combined experimental–numerical approach for through-thickness unsaturated permeability characterization of deformable fiber-beds. Composite Structures, 371, Article 119396. https://doi.org/10.1016/j.compstruct.2025.119396
Li, J., Zhou, X., Brochu, M., Chekir, N., Sixsmith, J. J. & Zhao, Y. F. (2025). Crystal introducing mechanism in laser wire directed energy deposition fabricated Ti6Al4V. Progress in Additive Manufacturing, 10(2), 1231-1241. https://doi.org/10.1007/s40964-024-00701-1
He, L., Wang, C., Zhang, M., Li, J., Chen, T. & Zhou, X. (2025). Design of BCC/FCC dual-solid solution refractory high-entropy alloys through CALPHAD, machine learning and experimental methods. npj Computational Materials, 11(1), Article 105. https://doi.org/10.1038/s41524-025-01597-3
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Efficient continuum-based modelling and analysis of polymer SLS: Insights into particle sintering and densification in straight and corner scanning passes. Additive Manufacturing, 109, Article 104828. https://doi.org/10.1016/j.addma.2025.104828
Friis, S. J., Strøm Hansen, T., Olesen, C. G., Poulsen, M., Gregersen, H. & Nygaard, J. V. (2025). Experimental and numerical study of solid needle insertions into human stomach tissue. Journal of the Mechanical Behavior of Biomedical Materials, 162, Article 106832. https://doi.org/10.1016/j.jmbbm.2024.106832
Clarin, M., Hultgren, G., Mansour, R., Narström, T. & Barsoum, Z. (2025). Experimental investigation of the preloading effect on S960 non-load carrying circular flat studs. Procedia Structural Integrity, 75, 467-473. https://doi.org/10.1016/j.prostr.2025.11.047
Vernica, T., Veluri, B. & Ramanujan, D. (2025). Feature-centric allocation and visualization of primary manufacturing process life cycle inventory data. Journal of Manufacturing Systems, 83, 557-576. https://doi.org/10.1016/j.jmsy.2025.10.006
Hesse, N., Strack, D., Rischewski, J. F., Gassert, F. T., Kufner, A., Urban, T., Lochschmidt, M. E., Schwaiger, B. J., Braun, C., Mueller, D. P., Pfeiffer, D., Baum, T., Subburaj, K., Pfeiffer, F. & Gersing, A. S. (2025). Finite element fracture load analysis and dark-field X-ray imaging of osteoporotic and healthy vertebrae in human lumbar spine specimens. BMC Musculoskeletal Disorders, 26(1), Article 545. https://doi.org/10.1186/s12891-025-08709-6
Sandhu, K., Karupppasamy, S., Pal, M., Sarkar, P. & Singh, S. (Eds.) (2025). Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques. (1 ed.) Elsevier, Academic Press. https://doi.org/10.1016/C2023-0-52605-9
Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Identification of Skills for Entrepreneurial Thinking Using Natural Language Processing: An Exploration of Entrepreneurs, Faculties Members and Design Students. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society - Proceedings of ICoRD 2025 (Vol. 4, pp. 255-266). Springer Science+Business Media. https://doi.org/10.1007/978-981-96-5495-6_20
Mansour, R., Enblom, P., Subasic, M., Ireland, A., Gustavsson, F., Forssgren, B. & Efsing, P. (2025). Influence of temperature-dependent viscoplastic relaxation and strain-induced martensitic transformation on the fatigue life of 304L stainless steel. International Journal of Fatigue, 198, Article 108992. https://doi.org/10.1016/j.ijfatigue.2025.108992
Aher, G., Sandberg, M., Boudjadar, J. & Ramanujan, D. (2025). Informing circularity-focused design optimization using parametric life-cycle engineering simulation models. Smart and Sustainable Manufacturing Systems, 9(1), 11-36. https://doi.org/10.1520/SSMS20240018
Strack, D., Mesbah, M., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2025). Interpatient variability and validation of simplified L4-L5 Finite Element Model. Abstract from The XXX Congress of the International Society of Biomechanics , Stockholm, Sweden. https://www.researchgate.net/publication/395188992_Interpatient_variability_and_validation_of_simplified_L4-L5_Finite_Element_Model
Sandhu, K., Singh, G., Subburaj, K., Sarkar, P. & Pal, M. (2025). Introduction. In Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques (pp. 3-6). Elsevier. https://doi.org/10.1016/B978-0-443-26751-2.00025-3
Kristensen, C. K., Kirkegaard, J., Sanporean, C.-G., Budzik, M. K. & Sandberg, M. (2025). Mitigating Discoloration in PA11 SLS: Experimental DoE and Novel Simulation Approaches.
Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract from EPF European Polymer Congress, Groningen, Netherlands.
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Particle Flow and Printing Path Effects in SLS. Abstract from EPF European Polymer Congress, Groningen, Netherlands.
Hassan, H., Chatterjee, A., Bushagour, A. & Layton, A. (2025). POTENTIAL FOR DIGITAL TECHNOLOGIES AND ADDITIVE MANUFACTURING TO SUPPORT LEAN MANUFACTURING AND CIRCULAR ECONOMY SYNERGIES. In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: Volume 2A: 45th Computers and Information in Engineering Conference (CIE) Article v02at02a040 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2025-169490
Karupppasamy, S. (2025). Pragmatic customization in medical device design for sustainable healthcare. In P. Kyratsis, A. Manavis & P. J. Davim (Eds.), CAD/CAM: Computer-Aided Design and Manufacturing, (pp. 143). De Gruyter. https://doi.org/10.1515/9783111585062-007
Lerchl, T., Strack, D., Allaire, B., Yee, E., Scott, R., Nispel, K., Moeller, H., Graf, R., Karupppasamy, S., Kirschke , J. S., Bouxsein, M. L. & Anderson, D. E. (2025). THE EFFECTS OF PREVALENT VERTEBRAL FRACTURES ON SPINAL BIOMECHANICS. Abstract from 20th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Barcelona, Spain. https://www.researchgate.net/publication/397941200_THE_EFFECTS_OF_PREVALENT_VERTEBRAL_FRACTURES_ON_SPINAL_BIOMECHANICS
Sandhu, K., Sarkar, P. & Karupppasamy, S. (2025). Understanding entrepreneurial thinking for designers: Perspectives from entrepreneurs, academicians, product designers, and students. Thinking Skills and Creativity, 56, Article 101728. https://doi.org/10.1016/j.tsc.2024.101728
Kaur, S., Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Understanding User Experience: Exploration of Various Definitions Using Natural Language Process. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society: Proceedings of ICoRD 2025 (Vol. 4, pp. 231-241). Springer. https://doi.org/10.1007/978-981-96-5495-6_18
Strack, D., Dieckmeyer, M., Sollmann , N., Kirschke , J. S. & Karupppasamy, S. (2025). Unexpectedly Higher Finite Element-Derived Strength in Fractured Vertebrae: Insights from a Retrospective Study. Abstract from Annual Meeting of the American Society of Bone and Mineral Research, Seattle, Washington, United States. https://doi.org/10.13140/RG.2.2.18868.72321
Eheliyagoda, D., Veluri, B., Liu, G. & Ramanujan, D. (2025). Unveiling the multiregional circular economy pathways for global dysprosium constraints. Resources, Conservation and Recycling, 215, Article 108121. https://doi.org/10.1016/j.resconrec.2024.108121
Yee, A. Z. H., Kwok, B., Ng, J., Loy, G. P., Ng, L. Y., Sng, J. R. H., Perrault, S., Lim, K. H. & Subburaj, K. (2025). Why Older Adults Integrate Digital Health Technology Into Their Everyday Lives: The Role of Basic Psychological Needs. Human Behavior and Emerging Technologies, 2025(1), Article 9711661. https://doi.org/10.1155/hbe2/9711661
Glisic, M., Veluri, B. & Ramanujan, D. (2024). A Bottom-Up Methodology for Identifying Key Performance Indicators for Sustainability Monitoring of Unit Manufacturing Processes. Sustainability, 16(2), Article 806. https://doi.org/10.3390/su16020806
Kunrath, K., Leka, S., Vestergaard, L. S., Presser, M. & Ramanujan, D. (2024). A Digital Tool for Scaffolding Innovation Learning in Engineering Education with Local Industry Needs. International Journal of Engineering Education, 40(4), 801-814.
Fontana, A., Sorlini, M., Leone, D., Rossi, L., Dell’Ambrogio, S., Nika, J., Koppelaar, R., Pamidi, S., Ramanujan, D. & Formentini, G. (2024). An Integrated Life Cycle Sustainability Assessment Framework for Product Life Cycle-Oriented Decision-Making. In A. I. I. Stefanakis & I. E. Nikolaou (Eds.), Circular Economy and Sustainable Development: A Necessary Nexus for a Sustainable Future (pp. 289–317). Springer. https://doi.org/10.1007/978-3-031-66007-8_17
Sutton, M., Daniels, J., Masoudi, N., Gorsich, D. & Turner, C. (2024). Approaches for exploration, analysis, and visualization of tradespace for engineering decision-making. Proceedings of the Design Society, 4, 3023-3032. https://doi.org/10.1017/pds.2024.306
Formentini, G., Martiny, T. A., Møller, C., Vernica, T. & Ramanujan, D. (2024). Assessing the disassembly performance of washing machines through the design for circular disassembly methodology. Proceedings of the Design Society, 4, 1249-1258. https://doi.org/10.1017/pds.2024.127
Oakes, B. J., Zhang, H., Hatledal, L. I., Feng, H., Frasheri, M., Sandberg, M., Gil Arboleda, S. & Gomes, C. (2024). Case Studies in Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 257-310). Springer. https://doi.org/10.1007/978-3-031-66719-0_12
Velu, R., Karupppasamy, S. & Kumar Subramaniyan, A. K. (Eds.) (2024). Digital Design and Manufacturing of Medical Devices and Systems. (1 ed.) Springer. https://doi.org/10.1007/978-981-99-7100-8
Glisic, M., Møller, C., Veluri, B. & Ramanujan, D. (2024). Digital Process Passport: A Conceptual Model for Information Collection and Sharing In Sustainable Manufacturing. Procedia CIRP, 130(27), 1077-1083. https://doi.org/10.1016/j.procir.2024.10.209
Subasic, M., Ireland, A., Mansour, R., Enblom, P., Krakhmalev, P., Åsberg, M., Fazi, A., Gårdstam, J., Shipley, J., Waernqvist, P., Forssgren, B. & Efsing, P. (2024). Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel. International Journal of Plasticity, 176, Article 103966. https://doi.org/10.1016/j.ijplas.2024.103966
Rygg Johnsen, A., Petersen, J. E., Pedersen, M. M. & Yildirim, H. C. (2024). Factors affecting the fatigue strength of additively manufactured Ti-6Al-4V parts. Welding in the World, 68(2), 361-409. https://doi.org/10.1007/s40194-023-01604-5

Displaying results 1 to 50 out of 91

1

2

Next

Revised 13.11.2025
-
AU Engineering