Sujon, M. A. S., Masato, D.
, Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024).
Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study.
Composites Science and Technology,
251, Article 110578.
https://doi.org/10.1016/j.compscitech.2024.110578
Won, J., Bae, J., Kim, H., Kim, T.
, Nemati, N., Choi, S., Jung, M. C., Kim, S., Choi, H., Kim, B., Jin, D., Kim, M., Han, M. J., Kim, J. Y. & Shim, W. (2023).
Polytypic Two-Dimensional FeAs with High Anisotropy.
Nano Letters,
23(23), 11057-11065.
https://doi.org/10.1021/acs.nanolett.3c03324
Gao, X., Zhang, Y., Haahr-Lillevang, L., Vedel-Smith, N. K.
& Andriollo, T. (2023).
3D strain pattern in additively manufactured AlSi10Mg from digital volume correlation. Heliyon,
9(12), Article e23186.
https://doi.org/10.1016/j.heliyon.2023.e23186
Nemati, N., Manhard, A., Greuner, H., Hunger, K., Böswirth, B., Visca, E. & You, J. H. (2023).
Microstructural evolution of tungsten under thermal loads: A comparative study between cyclic high heat flux loading and isochronous furnace heating.
Nuclear Materials and Energy,
36, Article 101465.
https://doi.org/10.1016/j.nme.2023.101465
Movassagh-Alanagh, F., Abdollah-zadeh, A.
, Alizadeh Zolbin, M., Nemati, N. & Aghababaei, R. (2023).
Plasma-enhanced chemical vapor deposition of TiB2 and TiBN hard coatings using BBr3.
Tribology International,
179, Article 108137.
https://doi.org/10.1016/j.triboint.2022.108137
Ledda, P. G.
, Pezzulla, M., Jambon-Puillet, E., Brun, P. T. & Gallaire, F. (2022).
Gravity-driven coatings on curved substrates: a differential geometry approach.
Journal of Fluid Mechanics,
949, Article A38.
https://doi.org/10.1017/jfm.2022.758
Darki, A. A., Dantan, A., Nygaard, J. V., Madsen, S. P., Parthenopoulos, A., Toft-Vandborg, C. & Vandborg, C. (2022).
Optical spatial differentiation with ultrathin freestanding subwavelength gratings. In P. Schelkens & T. Kozacki (Eds.),
Optics, Photonics and Digital Technologies for Imaging Applications VII Article 121380D SPIE - International Society for Optical Engineering.
https://doi.org/10.1117/12.2621186
Nasr Saleh, M.
, Budzik, M. K., Saeedifar, M., Zarouchas, D. & Teixeira de Freitas, S. (2022).
On the influence of the adhesive and the adherend ductility on mode I fracture characterization of thick adhesively-bonded joints.
International Journal of Adhesion and Adhesives,
115, Article 103123.
https://doi.org/10.1016/j.ijadhadh.2022.103123