Department of Mechanical and Production Engineering

Aarhus University Seal
 Department of Mechanical and Production Engineering About the department Sections Design and Manufacturing Publications

Publications by Design and Manufacturing

Are you looking for publications by Section of Design and Manufacturing? On this page you can find all the publications made by the Section of Design and Manufacturing - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Abedi, M., Chang, A., Hassan, H. I., Yang, A., Hickethier, M. L., Bushagour, A. H., Aghajari, M., Stoerzinger, K. A., Layton, A., Abbasi, B., Chang, C. H. & Feng, Z. (2026). Recovering Critical Metals from Brines: Technology Landscape, Circular Economy, and Future Trends. ACS Applied Energy Materials, 9(4), 2005-2034. https://doi.org/10.1021/acsaem.5c03407
Vernica, T., Veluri, B. & Ramanujan, D. (2025). Feature-centric allocation and visualization of primary manufacturing process life cycle inventory data. Journal of Manufacturing Systems, 83, 557-576. https://doi.org/10.1016/j.jmsy.2025.10.006
He, L., Zhang, M., Wang, P., Li, J., Wang, H., Wang, Y., Ye, X., Yan, X., Zhou, S., Liu, S., Zhao, P. & Zhou, X. (2026). Laser melting deposition of dual-phase tungsten-based refractory high-entropy alloys: Face-centered cubic-driven strength and ductility synergy revealed by first-principles calculations. Journal of Materials Science and Technology, 265, 100-111. https://doi.org/10.1016/j.jmst.2025.12.033
Jha, A. K., Jha, A. K., Airao, J. & Khanna, N. (2025). Advanced Machine Learning for Predicting Tool Wear and Tool Life: A Comprehensive Analysis Using Classification and Regression Techniques. In Recent Trends in Material Processing, Characterization and Applications (pp. 405-422). Springer. https://doi.org/10.1007/978-981-96-5856-5_31
Hassan, H., Chatterjee, A., Bushagour, A. & Layton, A. (2025). POTENTIAL FOR DIGITAL TECHNOLOGIES AND ADDITIVE MANUFACTURING TO SUPPORT LEAN MANUFACTURING AND CIRCULAR ECONOMY SYNERGIES. In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: Volume 2A: 45th Computers and Information in Engineering Conference (CIE) Article v02at02a040 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2025-169490
Clarin, M., Hultgren, G., Mansour, R., Narström, T. & Barsoum, Z. (2025). Experimental investigation of the preloading effect on S960 non-load carrying circular flat studs. Procedia Structural Integrity, 75, 467-473. https://doi.org/10.1016/j.prostr.2025.11.047
Šeta, B., Brander, M., Sandberg, M., Mollah, M. T., Kumar, V. & Spangenberg, J. (2026). Subvoxel Control of Fiber Orientation via Multidirectional Shearing in 3D Printing. Advanced Science, 13(9), Article e11008. https://doi.org/10.1002/advs.202511008
Yee, A. Z. H., Kwok, B., Ng, J., Loy, G. P., Ng, L. Y., Sng, J. R. H., Perrault, S., Lim, K. H. & Subburaj, K. (2025). Why Older Adults Integrate Digital Health Technology Into Their Everyday Lives: The Role of Basic Psychological Needs. Human Behavior and Emerging Technologies, 2025(1), Article 9711661. https://doi.org/10.1155/hbe2/9711661
Sandhu, K., Singh, G., Subburaj, K., Sarkar, P. & Pal, M. (2025). Introduction. In Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques (pp. 3-6). Elsevier. https://doi.org/10.1016/B978-0-443-26751-2.00025-3
Lerchl, T., Strack, D., Allaire, B., Yee, E., Scott, R., Nispel, K., Moeller, H., Graf, R., Karupppasamy, S., Kirschke , J. S., Bouxsein, M. L. & Anderson, D. E. (2025). THE EFFECTS OF PREVALENT VERTEBRAL FRACTURES ON SPINAL BIOMECHANICS. Abstract from 20th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Barcelona, Spain. https://www.researchgate.net/publication/397941200_THE_EFFECTS_OF_PREVALENT_VERTEBRAL_FRACTURES_ON_SPINAL_BIOMECHANICS
Strack, D., Mesbah, M., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2025). Interpatient variability and validation of simplified L4-L5 Finite Element Model. Abstract from The XXX Congress of the International Society of Biomechanics , Stockholm, Sweden. https://www.researchgate.net/publication/395188992_Interpatient_variability_and_validation_of_simplified_L4-L5_Finite_Element_Model
Karupppasamy, S. (2025). Pragmatic customization in medical device design for sustainable healthcare. In P. Kyratsis, A. Manavis & P. J. Davim (Eds.), CAD/CAM: Computer-Aided Design and Manufacturing, (pp. 143). De Gruyter. https://doi.org/10.1515/9783111585062-007
Sandhu, K., Karupppasamy, S., Pal, M., Sarkar, P. & Singh, S. (Eds.) (2025). Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques. (1 ed.) Elsevier, Academic Press. https://doi.org/10.1016/C2023-0-52605-9
Strack, D., Dieckmeyer, M., Sollmann , N., Kirschke , J. S. & Karupppasamy, S. (2025). Unexpectedly Higher Finite Element-Derived Strength in Fractured Vertebrae: Insights from a Retrospective Study. Abstract from Annual Meeting of the American Society of Bone and Mineral Research, Seattle, Washington, United States. https://doi.org/10.13140/RG.2.2.18868.72321
Strack, D., Mesbah, M., Kirschke , J. S. & Karupppasamy, S. (2025). Biomechanical Alterations Following Vertebral Fracture: A Patient-Specific L3-L5 Finite Element Analysis. Abstract from World Congress of Orthopaedic Research, Adelaide, South Australia, Australia. https://doi.org/10.13140/RG.2.2.28212.10884
Kaur, S., Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Understanding User Experience: Exploration of Various Definitions Using Natural Language Process. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society: Proceedings of ICoRD 2025 (Vol. 4, pp. 231-241). Springer. https://doi.org/10.1007/978-981-96-5495-6_18
Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Identification of Skills for Entrepreneurial Thinking Using Natural Language Processing: An Exploration of Entrepreneurs, Faculties Members and Design Students. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society - Proceedings of ICoRD 2025 (Vol. 4, pp. 255-266). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-981-96-5495-6_20
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Particle Flow and Printing Path Effects in SLS. Abstract from EPF European Polymer Congress, Groningen, Netherlands.
Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract from EPF European Polymer Congress, Groningen, Netherlands.
Kristensen, C. K., Kirkegaard, J., Sanporean, C.-G., Budzik, M. K. & Sandberg, M. (2025). Mitigating Discoloration in PA11 SLS: Experimental DoE and Novel Simulation Approaches.
Kabachi, M. A., Sandberg, M. & Ermanni, P. (2025). Combined experimental–numerical approach for through-thickness unsaturated permeability characterization of deformable fiber-beds. Composite Structures, 371, Article 119396. https://doi.org/10.1016/j.compstruct.2025.119396
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Efficient continuum-based modelling and analysis of polymer SLS: Insights into particle sintering and densification in straight and corner scanning passes. Additive Manufacturing, 109, Article 104828. https://doi.org/10.1016/j.addma.2025.104828
Hesse, N., Strack, D., Rischewski, J. F., Gassert, F. T., Kufner, A., Urban, T., Lochschmidt, M. E., Schwaiger, B. J., Braun, C., Mueller, D. P., Pfeiffer, D., Baum, T., Subburaj, K., Pfeiffer, F. & Gersing, A. S. (2025). Finite element fracture load analysis and dark-field X-ray imaging of osteoporotic and healthy vertebrae in human lumbar spine specimens. BMC Musculoskeletal Disorders, 26(1), Article 545. https://doi.org/10.1186/s12891-025-08709-6
Aher, G., Sandberg, M., Boudjadar, J. & Ramanujan, D. (2025). Informing circularity-focused design optimization using parametric life-cycle engineering simulation models. Smart and Sustainable Manufacturing Systems, 9(1), 11-36. https://doi.org/10.1520/SSMS20240018
He, L., Wang, C., Zhang, M., Li, J., Chen, T. & Zhou, X. (2025). Design of BCC/FCC dual-solid solution refractory high-entropy alloys through CALPHAD, machine learning and experimental methods. npj Computational Materials, 11(1), Article 105. https://doi.org/10.1038/s41524-025-01597-3
Formentini, G., Prioli, J. PJ., Ko, J., Hapuwatte, B., Ferrero, V., Badurdeen, F., Rickli, J. L. & Ramanujan, D. (2025). A review of disassembly systems for circular product design. Journal of Cleaner Production, 506, Article 145459. https://doi.org/10.1016/j.jclepro.2025.145459
Mansour, R., Enblom, P., Subasic, M., Ireland, A., Gustavsson, F., Forssgren, B. & Efsing, P. (2025). Influence of temperature-dependent viscoplastic relaxation and strain-induced martensitic transformation on the fatigue life of 304L stainless steel. International Journal of Fatigue, 198, Article 108992. https://doi.org/10.1016/j.ijfatigue.2025.108992
Eheliyagoda, D., Veluri, B., Liu, G. & Ramanujan, D. (2025). Unveiling the multiregional circular economy pathways for global dysprosium constraints. Resources, Conservation and Recycling, 215, Article 108121. https://doi.org/10.1016/j.resconrec.2024.108121
Sandhu, K., Sarkar, P. & Karupppasamy, S. (2025). Understanding entrepreneurial thinking for designers: Perspectives from entrepreneurs, academicians, product designers, and students. Thinking Skills and Creativity, 56, Article 101728. https://doi.org/10.1016/j.tsc.2024.101728
Glisic, M., Møller, C., Veluri, B. & Ramanujan, D. (2024). Digital Process Passport: A Conceptual Model for Information Collection and Sharing In Sustainable Manufacturing. Procedia CIRP, 130(27), 1077-1083. https://doi.org/10.1016/j.procir.2024.10.209
Friis, S. J., Strøm Hansen, T., Olesen, C. G., Poulsen, M., Gregersen, H. & Nygaard, J. V. (2025). Experimental and numerical study of solid needle insertions into human stomach tissue. Journal of the Mechanical Behavior of Biomedical Materials, 162, Article 106832. https://doi.org/10.1016/j.jmbbm.2024.106832
Glisic, M., Veluri, B. & Ramanujan, D. (2024). A Bottom-Up Methodology for Identifying Key Performance Indicators for Sustainability Monitoring of Unit Manufacturing Processes. Sustainability, 16(2), Article 806. https://doi.org/10.3390/su16020806
Fontana, A., Sorlini, M., Leone, D., Rossi, L., Dell’Ambrogio, S., Nika, J., Koppelaar, R., Pamidi, S., Ramanujan, D. & Formentini, G. (2024). An Integrated Life Cycle Sustainability Assessment Framework for Product Life Cycle-Oriented Decision-Making. In A. I. I. Stefanakis & I. E. Nikolaou (Eds.), Circular Economy and Sustainable Development: A Necessary Nexus for a Sustainable Future (pp. 289–317). Springer. https://doi.org/10.1007/978-3-031-66007-8_17
Borbolla Muñoz, A., Nezar Aboujarra, M. & Ramanujan, D. (2024). Investigating Sustainable Production Planning of an Industrial Progressive Die Stamping Process Using Discrete Event Simulation. In 29th Design for Manufacturing and the Life Cycle Conference (DFMLC): 29th Design for Manufacturing and the Life Cycle Conference (DFMLC) (Vol. 5). Article V005T05A006 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143648
Hejlskov Hansen, M., Vernica, T., Mansour, R. & Ramanujan, D. (2024). Three-Dimensional Visualization of Energy Consumption Data in Additive Manufacturing. In 44th Computers and Information in Engineering Conference (CIE): 44th Computers and Information in Engineering Conference (CIE) (Vol. 2A). Article V02AT02A046 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143405
Strack, D., Manohar Rayudu, N., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2024). OPTIMIZING PATIENT-SPECIFIC BONE FINITE ELEMENT ANALYSIS: MESH CONVERGENCE AND MATERIAL GROUPING STRATEGIES. Orthopaedic Proceedings, 127. https://doi.org/10.1302/1358-992X.2024.18.127
Strack, D., Mesbah, M., Manohar Rayudu, N., Baum, T., Kirschke , J. S. & Karupppasamy, S. (2024). IMPACT OF ANNULUS FIBROSUS STIFFNESS ON THE FRACTURE LOAD OF FUNCTIONAL SPINE UNITS. Orthopaedic Proceedings, 102. https://doi.org/10.1302/1358-992X.2024.18.102
Kunrath, K., Leka, S., Vestergaard, L. S., Presser, M. & Ramanujan, D. (2024). A Digital Tool for Scaffolding Innovation Learning in Engineering Education with Local Industry Needs. International Journal of Engineering Education, 40(4), 801-814.
Oakes, B. J., Zhang, H., Hatledal, L. I., Feng, H., Frasheri, M., Sandberg, M., Gil Arboleda, S. & Gomes, C. (2024). Case Studies in Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 257-310). Springer. https://doi.org/10.1007/978-3-031-66719-0_12
Abbiati, G., Gomes, C., Sandberg, M., Kazemi, Z., Hansen, S. T. & Larsen, P. G. (2024). Modelling for Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 89-127). Springer. https://doi.org/10.1007/978-3-031-66719-0_5
Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Article 104396. https://doi.org/10.1016/j.addma.2024.104396
Wang, C., Cong, D., Tang, G., Zhou, X. & Li, J. (2024). Improving thermoelectric properties in double half-Heusler M8FexNi8−xSb8 (M = TiZrHfNb)-InSb compounds via synergistic multiscale defects and high-mobility carrier injection. Chemical Engineering Journal, 496, Article 154313. https://doi.org/10.1016/j.cej.2024.154313
Li, J., Zhou, X., Brochu, M., Chekir, N., Sixsmith, J. J. & Zhao, Y. F. (2025). Crystal introducing mechanism in laser wire directed energy deposition fabricated Ti6Al4V. Progress in Additive Manufacturing, 10(2), 1231-1241. https://doi.org/10.1007/s40964-024-00701-1
Sutton, M., Daniels, J., Masoudi, N., Gorsich, D. & Turner, C. (2024). Approaches for exploration, analysis, and visualization of tradespace for engineering decision-making. Proceedings of the Design Society , 4, 3023-3032. https://doi.org/10.1017/pds.2024.306
Formentini, G., Martiny, T. A., Møller, C., Vernica, T. & Ramanujan, D. (2024). Assessing the disassembly performance of washing machines through the design for circular disassembly methodology. Proceedings of the Design Society , 4, 1249-1258. https://doi.org/10.1017/pds.2024.127
Subasic, M., Ireland, A., Mansour, R., Enblom, P., Krakhmalev, P., Åsberg, M., Fazi, A., Gårdstam, J., Shipley, J., Waernqvist, P., Forssgren, B. & Efsing, P. (2024). Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel. International Journal of Plasticity, 176, Article 103966. https://doi.org/10.1016/j.ijplas.2024.103966
Velu, R., Karupppasamy, S. & Kumar Subramaniyan, A. K. (Eds.) (2024). Digital Design and Manufacturing of Medical Devices and Systems. (1 ed.) Springer. https://doi.org/10.1007/978-981-99-7100-8
Alzweighi, M., Mansour, R., Maass, A., Hirn, U. & Kulachenko, A. (2024). Predicting moisture penetration dynamics in paper with machine learning approach. International Journal of Solids and Structures, 288, Article 112602. https://doi.org/10.1016/j.ijsolstr.2023.112602
Subasic, M., Olsson, M., Dadbakhsh, S., Zhao, X., Krakhmale, P. & Mansour, R. (2024). Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading. International Journal of Fatigue, 180, Article 108077. https://doi.org/10.1016/j.ijfatigue.2023.108077
Karupppasamy, S., Singh, S., Ćuković, S., Sandhu, K., Meixner, G. & Petruse, R. E. (Eds.) (2024). Smart VR/AR/MR Systems for Professionals. CRC Press. https://doi.org/10.1201/9781003306078

Displaying results 1 to 50 out of 82

1

2

Next

Revised 13.11.2025
-
AU Engineering