Find

For students
For PhDs
For employees

Department of Mechanical and Production Engineering

Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Bontempi, L., Zattoni, M., Ramella, A., Migliavacca, F., Ringgaard, S., Kim, W. Y., Johansen, P. & Colombo, M. (2025). Idealized aortic annuloplasty FSI digital twin of 3D-printed phantoms with 4D-flow MRI comparison. Computers in Biology and Medicine, 192, Article 110398. https://doi.org/10.1016/j.compbiomed.2025.110398

Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Identification of Skills for Entrepreneurial Thinking Using Natural Language Processing: An Exploration of Entrepreneurs, Faculties Members and Design Students. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society - Proceedings of ICoRD 2025 (Vol. 4, pp. 255-266). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-981-96-5495-6_20

Truong, T. T., Airao, J., Fattahi, S., Azarhoushang, B., Karras, P. & Aghababaei, R. (2025). Image-based machine learning model for tool wear estimation in milling Inconel 718. Wear, 571, Article 205865. https://doi.org/10.1016/j.wear.2025.205865

Bernal, D., Brandt, A. & Ulriksen, M. D. (2025). Improved Consistency on a Common Virtual Sensing Scheme. Abstract from IMAC XLIII, Orlando, Florida, United States.

Mansour, R., Enblom, P., Subasic, M., Ireland, A., Gustavsson, F., Forssgren, B. & Efsing, P. (2025). Influence of temperature-dependent viscoplastic relaxation and strain-induced martensitic transformation on the fatigue life of 304L stainless steel. International Journal of Fatigue, 198, Article 108992. https://doi.org/10.1016/j.ijfatigue.2025.108992

Aher, G., Sandberg, M., Boudjadar, J. & Ramanujan, D. (2025). Informing circularity-focused design optimization using parametric life-cycle engineering simulation models. Smart and Sustainable Manufacturing Systems, 9(1), 11-36. https://doi.org/10.1520/SSMS20240018

Ulriksen, M. D., Gres, S., Nieto, P. Z., Dahl, M. B. & Bernal, D. (2025). Invariant eigenvalue assignment and uncertainty quantification for damage localization. Journal of Vibration and Control. Advance online publication. https://doi.org/10.1177/10775463251315981

Nozarian, S., Hansen, C., Forooghi, P. & Abkar, M. (2025). Laminarization through annular gap injection in turbulent pipe flows: A large eddy simulation study. Physics of Fluids, 37(5), Article 055128 . https://doi.org/10.1063/5.0264788

Shojaeifard, M., Ferraresso, M., Lucantonio, A. & Bacca, M. (2025). Machine learning-based optimal design of fibrillar adhesives. Journal of the Royal Society Interface, 22(223), Article 20240636. https://doi.org/10.1098/rsif.2024.0636

Luo, X., Andriollo, T., Baxevanakis, K. P. & Silberschmidt, V. V. (2025). Microstructural effect on fracture evolution in spheroidal graphite iron: Numerical analysis. Engineering Failure Analysis, 174, Article 109459. https://doi.org/10.1016/j.engfailanal.2025.109459

Kristensen, C. K., Kirkegaard, J., Sanporean, C.-G., Budzik, M. K. & Sandberg, M. (2025). Mitigating Discoloration in PA11 SLS: Experimental DoE and Novel Simulation Approaches.

Jacobsen, A. N., Mahravan, E., Kragh-Schwarz, M. V., Catalano, J. & Fooroghi, P. (2025). Multiphysics simulations of alkaline water electrolyzer cells — A sensitivity study on the effect of two-phase flow modeling. Electrochimica Acta, 541, Article 147148. https://doi.org/10.1016/j.electacta.2025.147148

Spangsberg, E., Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Multiscale Modelling of Heat Transfer in Selective Laser Sintering. engrXiv. https://doi.org/10.31224/4704

Li, W., Negahban, M., Zhang, W., Zhang, L. & Zhu, J. (2025). Network yield and detangling as a tool for modeling back-stress network softening: A thermodynamically consistent model for polycarbonate. International Journal of Engineering Science, 215, Article 104322. https://doi.org/10.1016/j.ijengsci.2025.104322

Bazmohammadi, N., Madary, A., Vasquez, J. C. & Guerrero, J. M. (2025). New Horizons for Control and Energy Management of Closed-Ecological Systems: Insights and Future Trends. IEEE Industrial Electronics Magazine, 19(1), 2-14. https://doi.org/10.1109/MIE.2024.3437341

Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract from EPF European Polymer Congress, Groningen, Netherlands.

Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2025). Numerical analysis of fatigue crack propagation using a coarse-grained molecular dynamics approach. International Journal of Solids and Structures, 311, Article 113245. https://doi.org/10.1016/j.ijsolstr.2025.113245

Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Article 109782. https://doi.org/10.1007/s00170-025-15061-5

Rahdan, P. (2025). On the role of solar photovoltaics and demand management in the transition of the European energy system to net-zero emissions. Aarhus University Library.

Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Particle Flow and Printing Path Effects in SLS. Abstract from EPF European Polymer Congress, Groningen, Netherlands.

Bardella, L. & Jensen, H. M. (2025). Preface: Thematic session SM12 on Plasticity, Viscoplasticity and Creep of the 26th International Congress of Theoretical and Applied Mechanics (ICTAM2024). International Journal of Solids and Structures, 322, Article 113624. https://doi.org/10.1016/j.ijsolstr.2025.113624

Paggi, M. & Aghababaei, R. (2025). Preface: Contact Mechanics and Tribology in the ICTAM Century. International Journal of Solids and Structures, 323, Article 113642. https://doi.org/10.1016/j.ijsolstr.2025.113642

Gallego-Castillo, C. & Victoria, M. (2025). PyPSA-Spain: An extension of PyPSA-Eur to model the Spanish energy system. Energy Strategy Reviews, 60, Article 101764. https://doi.org/10.1016/j.esr.2025.101764

Ip, Y. C. A., Montemartini, L., Chang, J. J. M., Desiderato, A., Franco-Sierra, N. D., Geckeler, C., Herrera, M. A. G., Gregorini, M., Jucker, M., Kirchgeorg, S., Lüthi, M., Mächler, E., Thostrup, F. B., Murari, G., Mura, M., Pulido-Santacruz, P., Sangermano, F., Schindler, T., Melvad, C. ... Deiner, K. (2025). Real-time malaria detection in the Amazon rainforest via drone-collected eDNA and portable qPCR. One Health, 21, Article 101167. https://doi.org/10.1016/j.onehlt.2025.101167

Poulsen, E., Rysgaard, S., Melvad, P. & Melvad, C. (2025). Rugged, low-cost, and lightweight rosette water sampler for ocean profiling and mooring deployment. HardwareX, 22, Article e00661. https://doi.org/10.1016/j.ohx.2025.e00661

Ulriksen, M. D. & Bernal, D. (2025). Sensitivity-based model updating with parameter rejection. Applied Mathematical Modelling, 148, Article 116253. https://doi.org/10.1016/j.apm.2025.116253

Zeyen, E., Kalweit, S., Victoria, M. & Brown, T. (2025). Shifting burdens: how delayed decarbonisation of road transport affects other sectoral emission reductions. Environmental Research Letters, 20(4), Article 044044. https://doi.org/10.1088/1748-9326/adc290

Calafà, M., Jensen, H. M. & Andriollo, T. (2025). Solving plane crack problems via enriched holomorphic neural networks. Engineering Fracture Mechanics, 322, Article 111133. https://doi.org/10.1016/j.engfracmech.2025.111133

Rahdan, P., Zeyen, E. & Victoria, M. (2025). Strategic deployment of solar photovoltaics for achieving self-sufficiency in Europe throughout the energy transition. Nature Communications, 16(1), Article 6259. https://doi.org/10.1038/s41467-025-61492-9

Talasila, P., Tcherniak, D., Jensen, A. M. D., Mahato, S., Schörghofer-Queiroz, A., Ulriksen, M. D., Abbiati, G., Larsen, P. G. & Damkilde, L. (2025). Structural Health Monitoring of Engineering Structures Using Digital Twins: A Digital Twin Platform Approach. In Á. Cunha & E. Caetano (Eds.), Experimental Vibration Analysis for Civil Engineering Structures, EVACES 2025 - Volume 1 (pp. 986-996). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-3-031-96110-6_98

Aher, G. R. (2025). Supporting Design Space Exploration for Circular Product Design. [PhD thesis, Aarhus University].

Manti, S., Tsai, P.-H., Lucantonio, A. & Iliescu, T. (2025). Symbolic regression of data-driven reduced order model closures for under-resolved, convection-dominated flows. Journal of Computational Physics, 540, Article 114298. https://doi.org/10.1016/j.jcp.2025.114298

Xie, Z. (2025). System Perspectives on Hydrogen in Europe's Renewable Transition.

Alamia, A., Ambrose, H. W. & Rattigan, E. (2025). Techno-Economic Integration of Power-to-X Methanation in Biogas Systems: System-Level Optimization Based on Experimental Research. Poster session presented at 33rd European Biomass Conference & Exhibition , Valencia, Spain.

Nissen Pedersen, L. A., Don, J., Melvad, C. & Rysgaard, S. (2025). Temperature string device (TSD): A new low-cost instrument for sea ice observations in remote areas. HardwareX, 23, Article e00668. https://doi.org/10.1016/j.ohx.2025.e00668

E.F. Athanasiadis, A., Duncan, O., Budzik, M. K. & Dias, M. A. (2025). Toughness of Confined Auxetic Foams. Advanced Engineering Materials, 27(17), Article 2500626. https://doi.org/10.1002/adem.202500626

Airao, J., Jain, A., Nirala, C. K. & Unune, D. (2025). Tribological performance in micro-milling of Ti6Al4V under nanofluid-based minimum quantity lubrication. International Journal on Interactive Design and Manufacturing, 19(3), 1807-1819. https://doi.org/10.1007/s12008-024-01856-5

Sandhu, K., Sarkar, P. & Karupppasamy, S. (2025). Understanding entrepreneurial thinking for designers: Perspectives from entrepreneurs, academicians, product designers, and students. Thinking Skills and Creativity, 56, Article 101728. https://doi.org/10.1016/j.tsc.2024.101728

Kaur, S., Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Understanding User Experience: Exploration of Various Definitions Using Natural Language Process. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society: Proceedings of ICoRD 2025 (Vol. 4, pp. 231-241). Springer. https://doi.org/10.1007/978-981-96-5495-6_18

Eheliyagoda, D., Veluri, B., Liu, G. & Ramanujan, D. (2025). Unveiling the multiregional circular economy pathways for global dysprosium constraints. Resources, Conservation and Recycling, 215, Article 108121. https://doi.org/10.1016/j.resconrec.2024.108121

Zhou, Z., Yang, X. & Zhang, X. (2025). Variable impedance control on contact-rich manipulation of a collaborative industrial mobile manipulator: An imitation learning approach. Robotics and Computer-Integrated Manufacturing, 92, Article 102896. https://doi.org/10.1016/j.rcim.2024.102896

Victoria, M., Pullens, J. W. M., Torma, G., Lindhardt, M. K. K., Niazi, K. A. K., Jahangirlou, M. R., El Khoury, Y. V., Aschemann-Witzel, J., Ottosen, C. O. & Jørgensen, U. (2025). Vertical agrivoltaics in a temperate climate: Exploring technical, agricultural, meteorological, and social dimensions. Energy Nexus, 19, Article 100526. https://doi.org/10.1016/j.nexus.2025.100526

Dues, M., Dues, F., Steinbock, J., Melnikov, S., Doll, U., Röhle, I., Migliorini, M. & K. Zachos, P. (2024). 2D3C Measurement Of Velocity, Pressure And Temperature Fields In A Intake Flow Of An Air Turbine By Filtered Rayleigh Sattering (FRS) And Validation With LDV And PIV. In 21th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics https://doi.org/10.55037/lxlaser.21st.21

Glisic, M., Veluri, B. & Ramanujan, D. (2024). A Bottom-Up Methodology for Identifying Key Performance Indicators for Sustainability Monitoring of Unit Manufacturing Processes. Sustainability, 16(2), Article 806. https://doi.org/10.3390/su16020806

Hansen, J. G. & de Figueiredo, R. P. (2024). Active Object Detection and Tracking Using Gimbal Mechanisms for Autonomous Drone Applications. Drones, 8(2), Article 55. https://doi.org/10.3390/drones8020055

Kunrath, K., Leka, S., Vestergaard, L. S., Presser, M. & Ramanujan, D. (2024). A Digital Tool for Scaffolding Innovation Learning in Engineering Education with Local Industry Needs. International Journal of Engineering Education, 40(4), 801-814.

Du, Y., Liu, Z. & Zhang, X. (2024). Advancing Locomotion Control of a Quadruped Robot: Harnessing Hybrid Control Algorithms and Digital Twin Technology. In 2024 10th International Conference on Automation, Robotics, and Applications, ICARA 2024 (pp. 144-149). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICARA60736.2024.10553027

Wu, Z. & Møller, C. (2024). A global SOP perspective: managing cannibalization effect at the early phase of product transition. In 23rd International Working Seminar on Production Economics Universität Innsbruck.

Nozarian, S., Abkar, M. & Forooghi, P. (2024). An analysis of drag reduction using spanwise forcing on rough walls. International Journal of Heat and Fluid Flow, 106, Article 109306. https://doi.org/10.1016/j.ijheatfluidflow.2024.109306

Sanz-Cuadrado, C., Rahdan, P., Zhang, Z., Victoria, M. & Belén Cristóbal, A. (2024). A New Approach to Assess Individual Contributions to Energy Transition Goals.

Displaying results 51 to 100 out of 498

2

Revised 22.02.2024

-

AU Engineering