Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Strässle, R. M., Faldella, F. & Doll, U. (2024). Deep learning-based image segmentation for instantaneous flame front extraction. Experiments in Fluids, 65(6), Artikel 94. https://doi.org/10.1007/s00348-024-03814-z

Si, G., Zhao, Z., Zhang, Z. & Zhang, X. (2024). Design and Experimental Investigation of a Force Sensor for a 3-D Electrothermal Microgripper. IEEE Sensors Journal, 24(3), 2934-2944. https://doi.org/10.1109/JSEN.2023.3336214

Gøtske, E. K., Andresen, G. B., Neumann, F. & Victoria, M. (2024). Designing a sector-coupled European energy system robust to 60 years of historical weather data. Nature Communications, 15(1), Artikel 10680. https://doi.org/10.1038/s41467-024-54853-3

Bruun Andresen, G. (2024, apr.). det lykkelige Nordsøen - genåbning af Danmarks største gas-felt, Tyra-feltet. Instagram.com. https://www.instagram.com/p/C50BZMOMwXU/?igsh=dXQ5anoweTc1NHFk&img_index=1

Velu, R., Karupppasamy, S. & Kumar Subramaniyan, A. K. (red.) (2024). Digital Design and Manufacturing of Medical Devices and Systems. (1 udg.) Springer. https://doi.org/10.1007/978-981-99-7100-8

Glisic, M., Møller, C., Veluri, B. & Ramanujan, D. (2024). Digital Process Passport: A Conceptual Model for Information Collection and Sharing In Sustainable Manufacturing. Procedia CIRP, 130(27), 1077-1083. https://doi.org/10.1016/j.procir.2024.10.209

Jensen, A. M. D., Schoerghofer-Queiroz, A., Ulriksen, M. D., Tcherniak, D., Damkilde, L., Talasila, P., Larsen, P. G. & Abbiati, G. (2024). Digital twin as a service for damage prognosis of offshore wind turbine foundations. I W. Desmet, B. Pluymers, D. Moens & J. del Fresno Zarza (red.), Proceedings of ISMA 2024 - International Conference on Noise and Vibration Engineering and USD 2024 - International Conference on Uncertainty in Structural Dynamics (s. 4127-4141). KU Leuven, Departement Werktuigkunde.

Ma, G., da Silva, E. R. & Møller, C. (2024). Digital Twin-based Demand-Driven Production Planning and Scheduling System: A New Conceptual Framework. Procedia CIRP, 130, 705-710. https://doi.org/10.1016/j.procir.2024.10.152

Xie, Z. & Andresen, G. B. (2024). Direct and Indirect Hydrogen Storage: Dynamics and Interactions in the Transition to a Renewable Energy Based System for Europe.

Dideriksen, A. K., Andersen, M. F., Priest, J., Eriksen, N. F., Frandsen, M. T., Melvad, C., Rasmussen, T. F., Nielsen, N. H. K., Strømsnes, C. T., Ahlebæk, M. J., Samsing, S., Larsen, T. B., Don, J., Pedersen, L. A. N., Jacobsen, R. H., Rysgaard, S., Kim, J. M., Bayer, R., Christensen, C. ... Karoff, C. (2024). DISCO-2 – an ambitious earth observing student CubeSat for arctic climate research. Frontiers in Remote Sensing, 5, Artikel 1474560. https://doi.org/10.3389/frsen.2024.1474560

Manti, S. & Lucantonio, A. (2024). Discovering interpretable physical models using symbolic regression and discrete exterior calculus. Machine Learning: Science and Technology, 5(1), Artikel 015005. https://doi.org/10.1088/2632-2153/ad1af2

Rahdan, P., Zeyen, E., Gallego-Castillo, C. & Victoria, M. (2024). Distributed photovoltaics provides key benefits for a highly renewable European energy system. Applied Energy, 360, Artikel 122721. https://doi.org/10.1016/j.apenergy.2024.122721

Helal, I. B. I., Du, Y., Wang, H. & Zhang, X. (2024). Dynamic Modelling of a Continuum Robot Arm with Five 3-DoF Segments. I X. Rui & C. Liu (red.), Proceedings of the 2nd International Conference on Mechanical Systems (s. 477-493). Springer. https://doi.org/10.1007/978-981-99-8048-2_30

Sivebaek, I. M., Aghababaei, R. & Espallargas, N. (2024). Editorial: Selected papers from NORDTRIB 2022. Wear, 544-545, Artikel 205183. https://doi.org/10.1016/j.wear.2023.205183

Airao, J., Malekan, M., Budzik, M. & Aghababaei, R. (2024). Effect of Friction on Critical Cutting Depth for Ductile-Brittle Transition in Material Removal Mechanism. Journal of Tribology, 146(11), Artikel 114201 EN. https://doi.org/10.1115/1.4066052

Zhu, J., Xiao, J., Zhou, Q. & Aghababaei, R. (2024). Effect of grain boundary on scratch behavior of polycrystalline copper. International Journal of Mechanical Sciences, 272, Artikel 109175. https://doi.org/10.1016/j.ijmecsci.2024.109175

Faldella, F., Kim, T., Doll, U. & Jansohn, P. (2024). Effect of pressure and H₂ content on global consumption-based turbulent flame speed at gas turbine relevant conditions. International Journal of Hydrogen Energy, 81, 842-851. https://doi.org/10.1016/j.ijhydene.2024.07.282

Malekan, M., Ilvig, C. F. & Aghababaei, R. (2024). Effects of Edge Radius and Coating Thickness on the Cutting Performance of AlCrN-Coated Tool. International Journal of Precision Engineering and Manufacturing, 25(10), 2059-2075. https://doi.org/10.1007/s12541-024-01074-9

Si, G., Zhang, H., Zhang, Z. & Zhang, X. (2024). Enabling intuitive and effective micromanipulation: A wearable exoskeleton-integrated macro-to-micro teleoperation system with a 3D electrothermal microgripper. Robotics and Autonomous Systems, 181, Artikel 104776. https://doi.org/10.1016/j.robot.2024.104776

Bazmohammadi, N., Madary, A., Bazmohmmadi, S., Quintero, J. C. V. & Guerrero, J. M. (2024). Energy Management of a Zero-Emission Hybrid FC/Battery/Ultracapacitor Ship Using Model Predictive Control. Abstract fra The International Conference on Modeling and Simulation of Electric Machines, Converters and Systems (Electrimacs 2024).

Gøtske, E. K. (2024). Energy storage and climate impacts on the future renewable European energy system. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University.

Fulco , S., Budzik, M. K. & T. Turner , K. T. (2024). Enhancing toughness through geometric control of the process zone. Journal of the Mechanics and Physics of Solids, 184, Artikel 105548. https://doi.org/10.1016/j.jmps.2024.105548

Palade, D., Møller, C. & Hansen, A. K. (2024). Enterprise Integration as a Driving Factor for Guiding Digitalization in a Manufacturing Small and Medium Enterprise. Complex Systems Informatics and Modeling Quarterly, 2024(39), 48-64. https://doi.org/10.7250/csimq.2024-39.03

Arumugam, V. K., Mantzaras, J., Gantenbein, A., Doll, U. & Schildhauer, T. (2024). Experimental and numerical investigation of high-pressure methane catalytic synthesis from H2 and CO2. Proceedings of the Combustion Institute, 40(1-4), Artikel 105206. https://doi.org/10.1016/j.proci.2024.105206

Subasic, M., Ireland, A., Mansour, R., Enblom, P., Krakhmalev, P., Åsberg, M., Fazi, A., Gårdstam, J., Shipley, J., Waernqvist, P., Forssgren, B. & Efsing, P. (2024). Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel. International Journal of Plasticity, 176, Artikel 103966. https://doi.org/10.1016/j.ijplas.2024.103966

Ghasemi, A., Sadough Vanini, S. A., Alizadeh Zolbin, M. & Aghababaei, R. (2024). Exploring the influence of ultrasonic peening treatment at ambient and cryogenic conditions on the surface characteristics and fatigue life of austenitic stainless steel 304L. Surface and Coatings Technology, 494(Part 1 ), Artikel 131382. https://doi.org/10.1016/j.surfcoat.2024.131382

Islam, R., Madsen, S. P. & Christensen, M. (2024). Exploring the magnetic properties of W-type SrFe18O27 hexaferrite: Insights from a first-principles study. Physical Review B, 109(2), Artikel 024414. https://doi.org/10.1103/PhysRevB.109.024414

Hansen, C., Sørensen, J. N., I. A. Yang, X. & Abkar, M. (2024). Extension of the law of the wall exploiting weak similarity of velocity fluctuations in turbulent channels. Physics of Fluids, 36(1), Artikel 015134. https://doi.org/10.1063/5.0185334

Rygg Johnsen, A., Petersen, J. E., Pedersen, M. M. & Yildirim, H. C. (2024). Factors affecting the fatigue strength of additively manufactured Ti-6Al-4V parts. Welding in the World, 68(2), 361-409. https://doi.org/10.1007/s40194-023-01604-5

Bokharaie, B.-U., Aghababaei, R., Dias, M. A. & Budzik, M. K. (2024). Failure of 3D-printed composite continuous carbon fibre hexagonal frames. Composites Part B: Engineering, 275, Artikel 111307. https://doi.org/10.1016/j.compositesb.2024.111307

Subasic, M., Olsson, M., Dadbakhsh, S., Zhao, X., Krakhmale, P. & Mansour, R. (2024). Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading. International Journal of Fatigue, 180, Artikel 108077. https://doi.org/10.1016/j.ijfatigue.2023.108077

Rincón, M. J., Caspersen, A., Thorenfeldt Ingwersen, N., Reclari, M. & Abkar, M. (2024). Flow investigation of two-stand ultrasonic flow meters in a wide dynamic range by numerical and experimental methods. Flow Measurement and Instrumentation, 96, Artikel 102543. https://doi.org/10.1016/j.flowmeasinst.2024.102543

Sahli, R., Mikkelsen, J., Boye, M. S., Dias, M. A. & Aghababaei, R. (2024). Frictional Contact of Soft Polymeric Shells. Physical Review Letters, 133(10), Artikel 106202. https://doi.org/10.1103/PhysRevLett.133.106202

Alvandifar, N., Kristofersson, J. & Forooghi, P. (2024). Frost formation non-uniformity in a multi-circuit V-shape evaporator. International Journal of Refrigeration, 157, 137-149. https://doi.org/10.1016/j.ijrefrig.2023.10.018

Nguyen, V. H., Oh, S., Mahato, M., Tabassian, R., Yoo, H., Lee, S. G., Garai, M., Kim, K. J. & Oh, I. K. (2024). Functionally antagonistic polyelectrolyte for electro-ionic soft actuator. Nature Communications, 15(1), Artikel 435. https://doi.org/10.1038/s41467-024-44719-z

Hu, P., Dias, M. A. & Budzik, M. K. (2024). Geometric tunability of interlaminar resistance. Composites Part B: Engineering, 287, Artikel 111839. https://doi.org/10.1016/j.compositesb.2024.111839

Wu, Z. & Møller, C. (2024). Global Sales and Operations Planning: exploring transitional pathway from a fit perspective. IFAC-PapersOnLine, 58(27), 1200-1209.

Farah, S. (2024). Green hydrogen production: cost and CO2 emissions co-optimisation. 172-176. Poster-session præsenteret på Aarhus Power-to-X Symposium 2024, Aarhus, Danmark. https://doi.org/10.1049/icp.2024.1834

I. A. Yang, X., Abkar, M. & I. Park, G. (2024). Grid Convergence Properties of Wall-Modeled Large Eddy Simulations in the Asymptotic Regime. Journal of Fluids Engineering, Transactions of the ASME, 146(8), Artikel 081501. https://doi.org/10.1115/1.4064850

I. A. Yang, X. & Abkar, M. (2024). Grid Convergence Properties of Wall-Modeled Large-Eddy Simulations in the Asymptotic Regime. I ASME 2023 International Mechanical Engineering Congress and Exposition: Fluids Engineering (Bind 9). Artikel IMECE2023-116581, V009T10A017 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/IMECE2023-116581

Almskou, T. & Olesen, P. H. (2024). Grundrids af teknisk tegning. (6. udg.) Akademisk Forlag.

Lubineau, G., Alfano, M., Tao, R., Wagih, A., Yudhanto, A., Li, X., Almuhammadi, K., Hashem, M., Hu, P., Mahmoud, H. A. & Oz, F. (2024). Harnessing Extrinsic Dissipation to Enhance the Toughness of Composites and Composite Joints: A State-of-the-Art Review of Recent Advances. Advanced Materials, 36(51), Artikel 2407132. https://doi.org/10.1002/adma.202407132

singh, G., Mitra, T., Madsen, S. P. & Dantan, A. R. (2024). Highly reflective and high-Q thin resonant subwavelength gratings. Journal of Physics: Photonics, 6(4), Artikel 045009. https://doi.org/10.1088/2515-7647/ad70e7

Islam, R., Vero, K. & Borah, J. P. (2024). Historical overview and recent advances in permanent magnet materials. Materials Today Communications, 41, Artikel 110538. https://doi.org/10.1016/j.mtcomm.2024.110538

Strack, D., Mesbah, M., Manohar Rayudu, N., Baum, T., Kirschke , J. S. & Karupppasamy, S. (2024). IMPACT OF ANNULUS FIBROSUS STIFFNESS ON THE FRACTURE LOAD OF FUNCTIONAL SPINE UNITS. Orthopaedic Proceedings, 102. https://doi.org/10.1302/1358-992X.2024.18.102

Wang, C., Cong, D., Tang, G., Zhou, X. & Li, J. (2024). Improving thermoelectric properties in double half-Heusler M₈Fe_xNi_8−xSb₈ (M = TiZrHfNb)-InSb compounds via synergistic multiscale defects and high-mobility carrier injection. Chemical Engineering Journal, 496, Artikel 154313. https://doi.org/10.1016/j.cej.2024.154313

Ma, L., Nemati, N., Kim, D. E. & Aghababaei, R. (2024). Interface Amorphization Controls Maximum Wear Resistance of Multinanolayer DLC/WC Coatings. ACS Applied Materials and Interfaces, 16(14), 18090-18098. https://doi.org/10.1021/acsami.3c18218

Borbolla Muñoz, A., Nezar Aboujarra, M. & Ramanujan, D. (2024). Investigating Sustainable Production Planning of an Industrial Progressive Die Stamping Process Using Discrete Event Simulation. I 29th Design for Manufacturing and the Life Cycle Conference (DFMLC): 29th Design for Manufacturing and the Life Cycle Conference (DFMLC) (Bind 5). Artikel V005T05A006 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143648

Jensen, J. S. K. (2024). Investigation of three-body abrasive sand wear in submersible pumps. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University.

Farah, S. & Bruun Andresen, G. (2024). Investment-based optimisation of energy storage design parameters in a grid-connected hybrid renewable energy system. Applied Energy, 355, Artikel 122384. https://doi.org/10.1016/j.apenergy.2023.122384

Viser resultater 151 til 200 ud af 524

Forrige

Næste

Revideret 22.02.2024

Institut for Mekanik og Produktion