Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Bricalli, R., Zehtabiyan-Rezaie, N., Doll, U., Olesen, T. R. & Abkar, M. (2025). Experimental investigation of gas-bubble formation due to supersaturation in a plate heat exchanger. I Proceedings of the ASME 2025 Fluids Engineering Division Summer Meeting. Volume 2: Multiphase Flows Applications; Fluids Applications; Microfluidics; Fluids Mechanics Fundamentals; Fluids Engineering Education Artikel V002T07A004 American Society of Mechanical Engineers(ASME). https://doi.org/10.1115/FEDSM2025-156356

Wu, Z., Englyst, L. & Møller, C. (2025). Exploring adjustment mechanisms in the sales and operations planning process: an industrial case study. International Journal of Operations and Production Management, 45(11), 1937–1966. https://doi.org/10.1108/IJOPM-05-2024-0378

Bisoyi, S., Rathi, A. K. & Mahato, S. (2025). Fault diagnosis of rolling bearing failures using a multi-stage e-CNN-GRU-SAM network. Scientific Reports, 15(1), Artikel 33102. https://doi.org/10.1038/s41598-025-17008-y

Fuentes, J., Guix, M., Cenev, Z. M., Bakenecker, A. C., Ruiz-González, N., Beaune, G., Timonen, J. V. I., Sanchez, S. & Magdanz, V. (2025). Ferrofluid-Based Bioink for 3D Printed Skeletal Muscle Tissues with Enhanced Force and Magnetic Response. Advanced Materials Interfaces, 12(13), Artikel 2400824. https://doi.org/10.1002/admi.202400824

Geckeler, C., Kirchgeorg, S., Strunk, G., Thostrup, F. B., Sangermano, F., Desiderato, A., Lüthi, M., Jucker, M., Gonzalez Herrera, M. A., Franco-Sierra, N. D., Pulido-Santacruz, P., Marc Chang, J. J., Aden Ip, Y. C., Mächler, E., Svenning, A., Mougeot, G., Høye, T. T., Fopp, F., Pellissier, L. ... Mintchev, S. (2025). Field Deployment of BiodivX Drones in the Amazon Rainforest for Biodiversity Monitoring. IEEE Transactions on Field Robotics, 2, 336-352. https://doi.org/10.1109/TFR.2025.3574945

Hesse, N., Strack, D., Rischewski, J. F., Gassert, F. T., Kufner, A., Urban, T., Lochschmidt, M. E., Schwaiger, B. J., Braun, C., Mueller, D. P., Pfeiffer, D., Baum, T., Subburaj, K., Pfeiffer, F. & Gersing, A. S. (2025). Finite element fracture load analysis and dark-field X-ray imaging of osteoporotic and healthy vertebrae in human lumbar spine specimens. BMC Musculoskeletal Disorders, 26(1), Artikel 545. https://doi.org/10.1186/s12891-025-08709-6

Gøtske, E. K., Pratama, Y., Andresen, G. B., Gidden, M. J., Victoria, M. & Zakeri, B. (2025). First steps towards bridging integrated assessment modeling and high-resolution energy system models: a scenario matrix for a low-emissions sector-coupled European energy system. Environmental Research Communications, 7(8), Artikel 085010. https://doi.org/10.1088/2515-7620/adf60d

Ledda, P. G., Garg, H., Østergaard-Clausen, V., Rudzki, L. K., Madary, A. & Pezzulla, M. (2025). Fluid-induced snap-through instability of spherical shells. Physical Review Letters, 135, Artikel 234002. https://doi.org/10.1103/ltqy-d53p

Sandhu, K., Karupppasamy, S., Pal, M., Sarkar, P. & Singh, S. (red.) (2025). Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques. (1 udg.) Elsevier, Academic Press. https://doi.org/10.1016/C2023-0-52605-9

Tarpø, M. G., Ulriksen, M. D., Augustyn, D., Dollerup, N., Caglio, L. & Sørensen, J. D. (2025). Full-field stress estimation of offshore structures using modal expansion and principal component analysis. Journal of Sound and Vibration, 618(Part B), Artikel 119295. https://doi.org/10.1016/j.jsv.2025.119295

Vernica, T. (2025). Geometry-Centric Life Cycle Data Mapping and Visualization for Sustainable Product Design. [Ph.d.-afhandling, Aarhus Universitet].

Taylor, A. P., Vankayalapati, G. S., Budzik, M. K. & Turner, K. T. (2025). Hinged Rigid Beam Fracture Specimen for Characterization of Lattice and Thin-Sheet Materials. Experimental Mechanics, 65(9), 1375–1386. https://doi.org/10.1007/s11340-025-01214-w

Bontempi, L., Zattoni, M., Ramella, A., Migliavacca, F., Ringgaard, S., Kim, W. Y., Johansen, P. & Colombo, M. (2025). Idealized aortic annuloplasty FSI digital twin of 3D-printed phantoms with 4D-flow MRI comparison. Computers in Biology and Medicine, 192, Artikel 110398. https://doi.org/10.1016/j.compbiomed.2025.110398

Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Identification of Skills for Entrepreneurial Thinking Using Natural Language Processing: An Exploration of Entrepreneurs, Faculties Members and Design Students. I A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (red.), Responsible and Resilient Design for Society - Proceedings of ICoRD 2025 (Bind 4, s. 255-266). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-981-96-5495-6_20

Truong, T. T., Airao, J., Fattahi, S., Azarhoushang, B., Karras, P. & Aghababaei, R. (2025). Image-based machine learning model for tool wear estimation in milling Inconel 718. Wear, 571, Artikel 205865. https://doi.org/10.1016/j.wear.2025.205865

Bernal, D., Brandt, A. & Ulriksen, M. D. (2025). Improved Consistency on a Common Virtual Sensing Scheme. Abstract fra IMAC XLIII, Orlando, Florida, USA.

Mansour, R., Enblom, P., Subasic, M., Ireland, A., Gustavsson, F., Forssgren, B. & Efsing, P. (2025). Influence of temperature-dependent viscoplastic relaxation and strain-induced martensitic transformation on the fatigue life of 304L stainless steel. International Journal of Fatigue, 198, Artikel 108992. https://doi.org/10.1016/j.ijfatigue.2025.108992

Aher, G., Sandberg, M., Boudjadar, J. & Ramanujan, D. (2025). Informing circularity-focused design optimization using parametric life-cycle engineering simulation models. Smart and Sustainable Manufacturing Systems, 9(1), 11-36. https://doi.org/10.1520/SSMS20240018

Strack, D., Mesbah, M., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2025). Interpatient variability and validation of simplified L4-L5 Finite Element Model. Abstract fra The XXX Congress of the International Society of Biomechanics , Stockholm, Sverige. https://www.researchgate.net/publication/395188992_Interpatient_variability_and_validation_of_simplified_L4-L5_Finite_Element_Model

Sandhu, K., Singh, G., Subburaj, K., Sarkar, P. & Pal, M. (2025). Introduction. I Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques (s. 3-6). Elsevier. https://doi.org/10.1016/B978-0-443-26751-2.00025-3

Ulriksen, M. D., Gres, S., Nieto, P. Z., Dahl, M. B. & Bernal, D. (2025). Invariant eigenvalue assignment and uncertainty quantification for damage localization. Journal of Vibration and Control. Advance online publication. https://doi.org/10.1177/10775463251315981

Pimentel de Figueiredo, R. (2025). Knowledge-Guided Symbolic Regression for Interpretable Camera Calibration. Journal of Imaging, 11(11), Artikel 389. https://doi.org/10.3390/jimaging11110389

Nozarian, S., Hansen, C., Forooghi, P. & Abkar, M. (2025). Laminarization through annular gap injection in turbulent pipe flows: A large eddy simulation study. Physics of Fluids, 37(5), Artikel 055128 . https://doi.org/10.1063/5.0264788

Shojaeifard, M., Ferraresso, M., Lucantonio, A. & Bacca, M. (2025). Machine learning-based optimal design of fibrillar adhesives. Journal of the Royal Society Interface, 22(223), Artikel 20240636. https://doi.org/10.1098/rsif.2024.0636

Luo, X., Andriollo, T., Baxevanakis, K. P. & Silberschmidt, V. V. (2025). Microstructural effect on fracture evolution in spheroidal graphite iron: Numerical analysis. Engineering Failure Analysis, 174, Artikel 109459. https://doi.org/10.1016/j.engfailanal.2025.109459

Kristensen, C. K., Kirkegaard, J., Sanporean, C.-G., Budzik, M. K. & Sandberg, M. (2025). Mitigating Discoloration in PA11 SLS: Experimental DoE and Novel Simulation Approaches.

Manti, S. (2025). Model Discovery via Symbolic Regression with Applications to Fluid Transport Problems. [Ph.d.-afhandling, Aarhus Universitet].

Hansen, C. (2025). Modern Perspectives on Wall-Bounded Turbulence Modeling: Merging Physics-based and Data-Driven Approaches. [Ph.d.-afhandling, Aarhus Universitet].

Jacobsen, A. N., Mahravan, E., Kragh-Schwarz, M. V., Catalano, J. & Fooroghi, P. (2025). Multiphysics simulations of alkaline water electrolyzer cells — A sensitivity study on the effect of two-phase flow modeling. Electrochimica Acta, 541, Artikel 147148. https://doi.org/10.1016/j.electacta.2025.147148

Spangsberg, E., Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Multiscale Modelling of Heat Transfer in Selective Laser Sintering. engrXiv. https://doi.org/10.31224/4704

Li, W., Negahban, M., Zhang, W., Zhang, L. & Zhu, J. (2025). Network yield and detangling as a tool for modeling back-stress network softening: A thermodynamically consistent model for polycarbonate. International Journal of Engineering Science, 215, Artikel 104322. https://doi.org/10.1016/j.ijengsci.2025.104322

Bazmohammadi, N., Madary, A., Vasquez, J. C. & Guerrero, J. M. (2025). New Horizons for Control and Energy Management of Closed-Ecological Systems: Insights and Future Trends. IEEE Industrial Electronics Magazine, 19(1), 2-14. https://doi.org/10.1109/MIE.2024.3437341

Taffetani, M. & Pezzulla, M. (2025). Nonlinear morphoelastic energy based theory for stimuli responsive elastic shells. ArXiv.

Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract fra EPF European Polymer Congress, Groningen, Holland.

Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2025). Numerical analysis of fatigue crack propagation using a coarse-grained molecular dynamics approach. International Journal of Solids and Structures, 311, Artikel 113245. https://doi.org/10.1016/j.ijsolstr.2025.113245

Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Artikel 109782. https://doi.org/10.1007/s00170-025-15061-5

Rahdan, P. (2025). On the role of solar photovoltaics and demand management in the transition of the European energy system to net-zero emissions. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University Library.

Wei, R., Alfaro, E., Wang, T. & Wu, M. (2025). Optimizing In-Situ Strengthening of Low-Strength Porous Mortar Using a Definitive Screening Design Study. Afhandling præsenteret på The 2nd International Conference on Net-Zero Built Environment: Innovations in Materials, Structures, and Management, Cape Town, Sydafrika.

Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Particle Flow and Printing Path Effects in SLS. Abstract fra EPF European Polymer Congress, Groningen, Holland.

Karupppasamy, S. (2025). Pragmatic customization in medical device design for sustainable healthcare. I P. Kyratsis, A. Manavis & P. J. Davim (red.), CAD/CAM: Computer-Aided Design and Manufacturing, (s. 143). De Gruyter. https://doi.org/10.1515/9783111585062-007

Bardella, L. & Jensen, H. M. (2025). Preface: Thematic session SM12 on Plasticity, Viscoplasticity and Creep of the 26th International Congress of Theoretical and Applied Mechanics (ICTAM2024). International Journal of Solids and Structures, 322, Artikel 113624. https://doi.org/10.1016/j.ijsolstr.2025.113624

Paggi, M. & Aghababaei, R. (2025). Preface: Contact Mechanics and Tribology in the ICTAM Century. International Journal of Solids and Structures, 323, Artikel 113642. https://doi.org/10.1016/j.ijsolstr.2025.113642

Gallego-Castillo, C. & Victoria, M. (2025). PyPSA-Spain: An extension of PyPSA-Eur to model the Spanish energy system. Energy Strategy Reviews, 60, Artikel 101764. https://doi.org/10.1016/j.esr.2025.101764

Ip, Y. C. A., Montemartini, L., Chang, J. J. M., Desiderato, A., Franco-Sierra, N. D., Geckeler, C., Herrera, M. A. G., Gregorini, M., Jucker, M., Kirchgeorg, S., Lüthi, M., Mächler, E., Thostrup, F. B., Murari, G., Mura, M., Pulido-Santacruz, P., Sangermano, F., Schindler, T., Melvad, C. ... Deiner, K. (2025). Real-time malaria detection in the Amazon rainforest via drone-collected eDNA and portable qPCR. One Health, 21, Artikel 101167. https://doi.org/10.1016/j.onehlt.2025.101167

Poulsen, E., Rysgaard, S., Melvad, P. & Melvad, C. (2025). Rugged, low-cost, and lightweight rosette water sampler for ocean profiling and mooring deployment. HardwareX, 22, Artikel e00661. https://doi.org/10.1016/j.ohx.2025.e00661

Clausen, J. B. B., Møller, C., Asmussen, C. & Jørgensen, S. (2025). Self-service business intelligence systems in production domains: Introducing data democratization and mass customizable mashups. Digital Business, 5(2), Artikel 100156. https://doi.org/10.1016/j.digbus.2025.100156

Ulriksen, M. D. & Bernal, D. (2025). Sensitivity-based model updating with parameter rejection. Applied Mathematical Modelling, 148, Artikel 116253. https://doi.org/10.1016/j.apm.2025.116253

Zeyen, E., Kalweit, S., Victoria, M. & Brown, T. (2025). Shifting burdens: how delayed decarbonisation of road transport affects other sectoral emission reductions. Environmental Research Letters, 20(4), Artikel 044044. https://doi.org/10.1088/1748-9326/adc290

Calafà, M., Jensen, H. M. & Andriollo, T. (2025). Solving plane crack problems via enriched holomorphic neural networks. Engineering Fracture Mechanics, 322, Artikel 111133. https://doi.org/10.1016/j.engfracmech.2025.111133

Manti, S., Mohammadian, S., Treiber, M. & Lucantonio, A. (2025). SR-Traffic: Discovering Macroscopic Traffic Flow Models with Symbolic Regression. 1-7. https://ml4physicalsciences.github.io/2025/files/NeurIPS_ML4PS_2025_105.pdf

Viser resultater 51 til 100 ud af 524

Forrige

Næste

Revideret 22.02.2024

Institut for Mekanik og Produktion