Institut for Mekanik og Produktion

Aarhus Universitets segl

Publications by Mechanics and Materials

Are you looking for publications by Mechanics and Materials? On this page you can find all the publications made by the Mechanics and Materials - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

Teixeira de Freitas, S., Roos, L., Papadakis, L., Sena-Cruz, J. & Budzik, M. K. (2022, feb.). COST Action CA18120: Reliable roadmap for certification of bonded primary structures APPLICATION FOR COST GRANTS. EU. https://certbond.eu/wp-content/uploads/Certbond-Guidelines_COST-Grants_v20221114.pdf
Li, W., Wu, S., Zhu, J., Zhang, L., Zheng, J., Wang, H., Qiu, Y., Xie, G. & Li, C. (2025). Constitutive modelling of time-dependent polymer matrix composites: Incorporating a visco-hyperelastic model into the micromechanical framework. Composite Structures, 366, Artikel 119220. https://doi.org/10.1016/j.compstruct.2025.119220
van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2022). Composite joint toughening by multiscale architecturing through integrated manufacturing. Abstract fra The 11th European Solid Mechanics , Galway, Irland. file:///C:/Users/au564491/Downloads/vanInnis_esmc2022%20(1).pdf
Khanna, N., Patel, D., Raval, P., Airao, J., Badheka, V. & Rahman Rashid, R. A. (2024). Comparison of sustainable cooling/lubrication strategies for drilling of wire arc additively manufactured Inconel 625. Tribology International, 200, Artikel 110068. https://doi.org/10.1016/j.triboint.2024.110068
Barettin, D., Madsen, S., Lassen, B. & Willatzen, M. (2011). Comparison of Atomistic and Continuum Quantum-Dot Elastic Models and Implications for Optoelectronic Properties. A I P Conference Proceedings Series, 1399, 445.
Calafà, M. (2024). Characterization of the angular coefficient method on 2D and 3D piecewise smooth boundaries. Computational and Applied Mathematics, 43(8), Artikel 450. https://doi.org/10.1007/s40314-024-02969-z
Bae, J., Won, J., Kim, T., Choi, S., Kim, H., Oh, S. H. V., Lee, G., Lee, E., Jeon, S., Kim, M., Do, H. W., Seo, D., Kim, S., Cho, Y., Kang, H., Kim, B., Choi, H., Han, J., Kim, T. ... Shim, W. (2024). Cation-eutaxy-enabled III–V-derived van der Waals crystals as memristive semiconductors. Nature Materials, 23(10), 1402-1410. https://doi.org/10.1038/s41563-024-01986-x
van Innis, C., Budzik, M. K. & Pardoen, T. (2025). Bridging in co-cured composite joints. International Journal of Solids and Structures, 309, Artikel 113194. https://doi.org/10.1016/j.ijsolstr.2024.113194
Teixeira de Freitas, S. & Budzik, M. K. (2023). Bondline thickness: Fracture mechanics perspective. I D. A. Dillard (red.), Advances in Structural Adhesive Bonding, Second Edition (2 udg., s. 615-641). Woodhead Publishing. https://doi.org/10.1016/B978-0-323-91214-3.00027-2
Anand, M., Panigrahi, S., Kofoed, M. V. W., Aghababaei, R. & Agarwala, S. (2024). Bioinspired poly(vinyl alcohol) films with tunable adhesion and self-healing for biodegradable electronics and beyond. Sustainable Materials and Technologies, 41, Artikel e01084. https://doi.org/10.1016/j.susmat.2024.e01084
Darabi, R., Oliveira, J. P., Nemati, N., Reis, A. & de Sá, J. C. (2025). Benchmarking advanced multiphase field modeling of Inconel 625 in additive manufacturing: Correlating powder bed fusion with dendrite growth and crack formation. Materialia, 40, Artikel 102384. https://doi.org/10.1016/j.mtla.2025.102384
Airao, J., Gupta, A., Nirala, C. K. & Hsue, A. W. J. (2024). Bayesian neural networks modeling for tool wear prediction in milling Al 6061 T6 under MQL conditions. International Journal of Advanced Manufacturing Technology, 135(5-6), 2777-2788. https://doi.org/10.1007/s00170-024-14678-2
Ma, L. (2024). Atomic insights into the abrasive wear mechanisms of mono- and multi-layer coatings at the single asperity level. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University.
Langthjem, M. A. (2025). Asymptotic approximations and stability of a propagating bucklewave. Zeitschrift fuer Angewandte Mathematik und Physik, 76(5), Artikel 193. https://doi.org/10.1007/s00033-025-02568-w
Pardoen, T., T. Turner , K. T. & Budzik, M. K. (2023). Architected adhesive joints with improved fracture toughness. I D. A. Dillard (red.), Advances in Structural Adhesive Bonding (2 udg., s. 1105-1122). Woodhead Publishing. https://doi.org/10.1016/B978-0-323-91214-3.00012-0
Sadik, S. & Yavari, A. (2025). A generalized Coleman-Noll procedure and the balance laws of hyper-anelasticity. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 481(2320), Artikel 20250076. https://doi.org/10.1098/rspa.2025.0076
Nazari, R., Aghababaei, R., Papangelo, A. & Ciavarella, M. (2025). Adhesion- and friction-induced suppression of buckling in thin spherical shells in contact with a rigid wall. International Journal of Engineering Science, 215, Artikel 104329. https://doi.org/10.1016/j.ijengsci.2025.104329
Hansen, J. G. & de Figueiredo, R. P. (2024). Active Object Detection and Tracking Using Gimbal Mechanisms for Autonomous Drone Applications. Drones, 8(2), Artikel 55. https://doi.org/10.3390/drones8020055
Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2022). A coarse-grained concurrent multiscale method for simulating brittle fracture. International Journal of Solids and Structures, 254-255, Artikel 111898. https://doi.org/10.1016/j.ijsolstr.2022.111898
Alessi, C., Falotico, E. & Lucantonio, A. (2023). Ablation Study of a Dynamic Model for a 3D-Printed Pneumatic Soft Robotic Arm. IEEE Access, 11, 37840-37853. https://doi.org/10.1109/ACCESS.2023.3266282
Islam, R. & Borah, J. P. (2023). 3d transition metal substituted Fe3Se4: prediction of potential permanent magnet. Journal of Physics: Condensed Matter, 35(32), Artikel 325801. https://doi.org/10.1088/1361-648X/acd319
Gao, X., Zhang, Y., Haahr-Lillevang, L., Vedel-Smith, N. K. & Andriollo, T. (2023). 3D strain pattern in additively manufactured AlSi10Mg from digital volume correlation. Heliyon, 9(12), Artikel e23186. https://doi.org/10.1016/j.heliyon.2023.e23186

Viser resultater 101 til 122 ud af 122

Forrige

1

2

3

Revideret 13.11.2025
-
AU Engineering