Publications by Mechanics and Materials

Are you looking for publications by Mechanics and Materials? On this page you can find all the publications made by the Mechanics and Materials - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

Kristensen, C. K., Kirkegaard, J., Sanporean, C.-G., Budzik, M. K. & Sandberg, M. (2025). Mitigating Discoloration in PA11 SLS: Experimental DoE and Novel Simulation Approaches.

Nemati, N., Manhard, A., Greuner, H., Hunger, K., Böswirth, B., Visca, E. & You, J. H. (2023). Microstructural evolution of tungsten under thermal loads: A comparative study between cyclic high heat flux loading and isochronous furnace heating. Nuclear Materials and Energy, 36, Artikel 101465. https://doi.org/10.1016/j.nme.2023.101465

Luo, X., Andriollo, T., Baxevanakis, K. P. & Silberschmidt, V. V. (2025). Microstructural effect on fracture evolution in spheroidal graphite iron: Numerical analysis. Engineering Failure Analysis, 174, Artikel 109459. https://doi.org/10.1016/j.engfailanal.2025.109459

Dias, M. A., Athanasiadis, A., Fernando, D. N. & Budzik, M. K. (2023). Micromechanics of architected interfaces. 73. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.

Alameen, E. H. O., Lucantonio, A. & DeSimone, A. (2023). Mechanics and transient morphing of soft hygroscopic bilayers. Mechanics Research Communications, 131, Artikel 104131. https://doi.org/10.1016/j.mechrescom.2023.104131

Budzik, M. K., Fulco , S. & Turner, K. (2022). Materials with architected plasticity and decoupled strength and toughness. Abstract fra The 11th European Solid Mechanics , Galway, Irland.

Alstrøm, T. S., Sørensen, M. P., Pedersen, N. F. & Madsen, S. (2011). Magnetic Flux Lines in Complex Geometry Type-II Superconductors Studied by the Time Dependent Ginzburg-Landau Equation. Acta Applicandae Mathematicae, 115, 63-74. https://doi.org/10.1007/s10440-010-9580-8

Shojaeifard, M., Ferraresso, M., Lucantonio, A. & Bacca, M. (2025). Machine learning-based optimal design of fibrillar adhesives. Journal of the Royal Society Interface, 22(223), Artikel 20240636. https://doi.org/10.1098/rsif.2024.0636

Pimentel de Figueiredo, R. (2025). Knowledge-Guided Symbolic Regression for Interpretable Camera Calibration. Journal of Imaging, 11(11), Artikel 389. https://doi.org/10.3390/jimaging11110389

Jensen, J. S. K. (2024). Investigation of three-body abrasive sand wear in submersible pumps. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University.

Ma, L., Nemati, N., Kim, D. E. & Aghababaei, R. (2024). Interface Amorphization Controls Maximum Wear Resistance of Multinanolayer DLC/WC Coatings. ACS Applied Materials and Interfaces, 16(14), 18090-18098. https://doi.org/10.1021/acsami.3c18218

Truong, T. T., Airao, J., Fattahi, S., Azarhoushang, B., Karras, P. & Aghababaei, R. (2025). Image-based machine learning model for tool wear estimation in milling Inconel 718. Wear, 571, Artikel 205865. https://doi.org/10.1016/j.wear.2025.205865

Islam, R., Vero, K. & Borah, J. P. (2024). Historical overview and recent advances in permanent magnet materials. Materials Today Communications, 41, Artikel 110538. https://doi.org/10.1016/j.mtcomm.2024.110538

Taylor, A. P., Vankayalapati, G. S., Budzik, M. K. & Turner, K. T. (2025). Hinged Rigid Beam Fracture Specimen for Characterization of Lattice and Thin-Sheet Materials. Experimental Mechanics, 65(9), 1375–1386. https://doi.org/10.1007/s11340-025-01214-w

singh, G., Mitra, T., Madsen, S. P. & Dantan, A. R. (2024). Highly reflective and high-Q thin resonant subwavelength gratings. Journal of Physics: Photonics, 6(4), Artikel 045009. https://doi.org/10.1088/2515-7647/ad70e7

Lubineau, G., Alfano, M., Tao, R., Wagih, A., Yudhanto, A., Li, X., Almuhammadi, K., Hashem, M., Hu, P., Mahmoud, H. A. & Oz, F. (2024). Harnessing Extrinsic Dissipation to Enhance the Toughness of Composites and Composite Joints: A State-of-the-Art Review of Recent Advances. Advanced Materials, 36(51), Artikel 2407132. https://doi.org/10.1002/adma.202407132

Ledda, P. G., Pezzulla, M., Jambon-Puillet, E., Brun, P. T. & Gallaire, F. (2022). Gravity-driven coatings on curved substrates: a differential geometry approach. Journal of Fluid Mechanics, 949, Artikel A38. https://doi.org/10.1017/jfm.2022.758

Hu, P., Dias, M. A. & Budzik, M. K. (2024). Geometric tunability of interlaminar resistance. Composites Part B: Engineering, 287, Artikel 111839. https://doi.org/10.1016/j.compositesb.2024.111839

Sahli, R., Mikkelsen, J., Boye, M. S., Dias, M. A. & Aghababaei, R. (2024). Frictional Contact of Soft Polymeric Shells. Physical Review Letters, 133(10), Artikel 106202. https://doi.org/10.1103/PhysRevLett.133.106202

Ledda, P. G., Garg, H., Østergaard-Clausen, V., Rudzki, L. K., Madary, A. & Pezzulla, M. (2025). Fluid-induced snap-through instability of spherical shells. Physical Review Letters, 135, Artikel 234002. https://doi.org/10.1103/ltqy-d53p

Vero, K., Islam, R. & Borah, J. P. (2023). First-principles study on the enhancement of structure stability and magnetocrystalline anisotropy energy of L1₀-ordered Mn_1−xFe_xAlC compound for permanent magnet application. Journal of Applied Physics, 134(15), Artikel 153902. https://doi.org/10.1063/5.0172356

Budzik, M. K., Dias, M. A., Hedvard, M. & Athanasiadis, A. (2023). Failure of architected interfaces. 47. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.

Bokharaie, B., Aghababaei, R. & Budzik, M. K. (2022). Failure of additively manufactured carbon fiber composite hexagonal frames. Abstract fra The 20th European Conference on Composite Materials, Lausanne, Schweiz. file:///C:/Users/au564491/Downloads/Abstracts_Monday.pdf

Bokharaie, B.-U., Aghababaei, R., Dias, M. A. & Budzik, M. K. (2024). Failure of 3D-printed composite continuous carbon fibre hexagonal frames. Composites Part B: Engineering, 275, Artikel 111307. https://doi.org/10.1016/j.compositesb.2024.111307

Islam, R., Madsen, S. P. & Christensen, M. (2024). Exploring the magnetic properties of W-type SrFe18O27 hexaferrite: Insights from a first-principles study. Physical Review B, 109(2), Artikel 024414. https://doi.org/10.1103/PhysRevB.109.024414

Ghasemi, A., Sadough Vanini, S. A., Alizadeh Zolbin, M. & Aghababaei, R. (2024). Exploring the influence of ultrasonic peening treatment at ambient and cryogenic conditions on the surface characteristics and fatigue life of austenitic stainless steel 304L. Surface and Coatings Technology, 494(Part 1 ), Artikel 131382. https://doi.org/10.1016/j.surfcoat.2024.131382

Fulco , S., Budzik, M. K. & Turner, K. (2022). Exploiting architected plasticity to enhance fracture toughness while maintaining strength. Abstract fra 19th U.S. National Congress of Theoretical and Applied

Mechanics, Austin, Texas, USA. https://drive.google.com/file/d/1uyFLy4Pk62paHMze4hVJSe7VnknWq1hT/view

Jensen, J. S. K. & Aghababaei, R. (2023). Experimental investigation of three-body wear for rubber seals in abrasive slurry environment. Wear, 534-535, Artikel 205131. https://doi.org/10.1016/j.wear.2023.205131

Jensen, J. S. K., Esmizadeh, S., Lund, M., Juhl, J., Nemati, N. & Aghababaei, R. (2025). Evaluating the effect of particle roundness on three-body wear between polymers and metals. Wear, 570, Artikel 206000. https://doi.org/10.1016/j.wear.2025.206000

Langthjem, M. A. & Jensen, H. M. (2025). Erratum to: On matched asymptotic expansion solutions of a bucklewave propagation problem (ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, (2024), 104, 5, 10.1002/zamm.202300655). Zeitschrift fuer Angewandte Mathematik und Mechanik, 105(5), Artikel e70095. https://doi.org/10.1002/zamm.70095

Norouzikudiani, R., Lucantonio, A. & DeSimone, A. (2023). Equilibrium and transient response of photo-actuated Liquid Crystal Elastomer beams. Mechanics Research Communications, 131, Artikel 104126. https://doi.org/10.1016/j.mechrescom.2023.104126

Abu Shaid Sujon, M., Andriollo, T. & Islam, A. (2023). Enhancing vibration damping properties of MABS/VDT blends using SEBS‑g‑MAH as a compatibilizer. Journal of Polymer Research, 30(12), Artikel 440. https://doi.org/10.1007/s10965-023-03819-y

Fulco , S., Budzik, M. K. & T. Turner , K. T. (2024). Enhancing toughness through geometric control of the process zone. Journal of the Mechanics and Physics of Solids, 184, Artikel 105548. https://doi.org/10.1016/j.jmps.2024.105548

Islam, R., Madsen, S. P. & Christensen, M. (2025). Enhancing magnetocrystalline anisotropy in W-type SrFe₁₈O₂₇ hexaferrite via tailored substitutions. Acta Materialia, 288, 120828. Artikel 120828. https://doi.org/10.1016/j.actamat.2025.120828

Hund, J., Kouznetsova, V. & Andriollo, T. (2025). Efficient prediction of strength and strain localisation in porous solids via microstructure-based limit analysis. Mechanics of Materials, 201, Artikel 105208. https://doi.org/10.1016/j.mechmat.2024.105208

Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Efficient continuum-based modelling and analysis of polymer SLS: Insights into particle sintering and densification in straight and corner scanning passes. Additive Manufacturing, 109, Artikel 104828. https://doi.org/10.1016/j.addma.2025.104828

Malekan, M., Ilvig, C. F. & Aghababaei, R. (2024). Effects of Edge Radius and Coating Thickness on the Cutting Performance of AlCrN-Coated Tool. International Journal of Precision Engineering and Manufacturing, 25(10), 2059-2075. https://doi.org/10.1007/s12541-024-01074-9

Movassagh-Alanagh, F., Abdollah-Zadeh, A. & Aghababaei, R. (2025). Effects of B and C elements on microstructure, mechanical and tribological properties of TiN coating deposited by PACVD. Materials Characterization, 225, Artikel 115178. https://doi.org/10.1016/j.matchar.2025.115178

Zhu, J., Xiao, J., Zhou, Q. & Aghababaei, R. (2024). Effect of grain boundary on scratch behavior of polycrystalline copper. International Journal of Mechanical Sciences, 272, Artikel 109175. https://doi.org/10.1016/j.ijmecsci.2024.109175

Airao, J., Malekan, M., Budzik, M. & Aghababaei, R. (2024). Effect of Friction on Critical Cutting Depth for Ductile-Brittle Transition in Material Removal Mechanism. Journal of Tribology, 146(11), Artikel 114201 EN. https://doi.org/10.1115/1.4066052

Sivebaek, I. M., Aghababaei, R. & Espallargas, N. (2024). Editorial: Selected papers from NORDTRIB 2022. Wear, 544-545, Artikel 205183. https://doi.org/10.1016/j.wear.2023.205183

Pimentel de Figueiredo, R., Limberg, C., Jamone, L. & Bernardino, A. (2025). Editorial: Computer vision mechanisms for resource-constrained robotics applications. Frontiers in Robotics and AI, 12, Artikel 1680098. https://doi.org/10.3389/frobt.2025.1680098

Fulco, S., Budzik, M. K., Xiao, H., Durian, D. J. & Turner, K. T. (2025). Disorder enhances the fracture toughness of 2D mechanical metamaterials. PNAS Nexus, 4(2), Artikel pgaf023. https://doi.org/10.1093/pnasnexus/pgaf023

Manti, S. & Lucantonio, A. (2024). Discovering interpretable physical models using symbolic regression and discrete exterior calculus. Machine Learning: Science and Technology, 5(1), Artikel 015005. https://doi.org/10.1088/2632-2153/ad1af2

Budzik, M. K., Dias, M. A. & Hoffmann, U. S. (2023). Design of failure loads and crack growth by width varying interfaces. 142. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.

Fulco , S., Budzik, M. K., D. Bain , E. & T. Turner , K. (2022). Decoupling toughness and strength through architected plasticity. Extreme Mechanics Letters, 57, Artikel 101912. https://doi.org/10.1016/j.eml.2022.101912

Hu, P., Li, S. & Budzik, M. K. (2025). Decoupling fracture energy from crack area via surface patterning. Surfaces and Interfaces, 62, Artikel 106066. https://doi.org/10.1016/j.surfin.2025.106066

Truong, T. T., Airao, J., Hojati, F., Ilvig, C. F., Azarhoushang, B., Karras, P. & Aghababaei, R. (2024). Data-driven prediction of tool wear using Bayesian regularized artificial neural networks. Measurement: Journal of the International Measurement Confederation, 238, Artikel 115303. https://doi.org/10.1016/j.measurement.2024.115303

Dias, M. A., E.F. Athanasiadis, A., N. Fernando, D. & Budzik, M. K. (2024). Damage propagation in Architected-Interfaces. 1. Abstract fra American Physical Society March Meeting 2024, Minneapolis , Minnesota, USA. https://meetings.aps.org/Meeting/MAR24/Session/Q35.10

Aghababaei, R., Malekan, M. & Budzik, M. (2021). Cutting Depth Dictates the Transition from Continuous to Segmented Chip Formation. Physical Review Letters, 127(23), Artikel A202. https://doi.org/10.1103/PhysRevLett.127.235502

Viser resultater 51 til 100 ud af 122

Forrige

Næste

Back to the main page

Revideret 13.11.2025

AU Engineering