Institut for Mekanik og Produktion

Aarhus Universitets segl

Publications by Mechanics and Materials

Are you looking for publications by Mechanics and Materials? On this page you can find all the publications made by the Mechanics and Materials - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2023). Ultra tough architected joints through single step bonding process with tunable properties. 205. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.
van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra tough architected joints through single manufacturing step. Abstract fra 9th International Conference on Fracture of Polymers, Composites and Adhesives, Schweiz.
van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra-tough architected adhesive joints for integrated composite processing and bonding. Composites Part A: Applied Science and Manufacturing, 177, Artikel 107949. https://doi.org/10.1016/j.compositesa.2023.107949
Airao, J., Jain, A., Nirala, C. K. & Unune, D. (2025). Tribological performance in micro-milling of Ti6Al4V under nanofluid-based minimum quantity lubrication. International Journal on Interactive Design and Manufacturing, 19(3), 1807-1819. https://doi.org/10.1007/s12008-024-01856-5
Kristiansen, M. F., Rasmussen, S. & Mikkelsen, L. P. (2025). Transforming load-controlled fatigue test data into a strain-based SN-curve: Results for unidirectional non-crimp glass fiber/epoxy composites tested in tension-tension. IOP Conference Series: Materials Science and Engineering, 1338(1), Artikel 012018. https://doi.org/10.1088/1757-899X/1338/1/012018
E.F. Athanasiadis, A., Duncan, O., Budzik, M. K. & Dias, M. A. (2025). Toughness of Confined Auxetic Foams. Advanced Engineering Materials, 27(17), Artikel 2500626. https://doi.org/10.1002/adem.202500626
L.S. Hedvard, M., Dias, M. A. & Budzik, M. K. (2024). Toughening mechanisms and damage propagation in Architected-Interfaces. International Journal of Solids and Structures, 288, Artikel 112600. https://doi.org/10.1016/j.ijsolstr.2023.112600
Heide-Jørgensen, S., Budzik, M. K. & Ibsen, C. H. (2022). Three-dimensional, multiscale homogenization for hybrid woven composites with fiber-matrix debonding. Composites Science and Technology, 218, Artikel 109204. https://doi.org/10.1016/j.compscitech.2021.109204
Budzik, M. K., Wolfahrt, M., Reis, P., Kozłowski, M., Sena-Cruz, J., Papadakis, L., Nasr Saleh, M., V. Machalicka, K., Teixeira de Freitas, S. & P. Vassilopoulos, A. (2022). Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview. The Journal of Adhesion, 98(14), 2133-2209. https://doi.org/10.1080/00218464.2021.1953479
Nitschke, I., Sadik, S. & Voigt, A. (2024). Tangential Tensor Fields on Deformable Surfaces – How to Derive Consistent L2-Gradient Flows. IMA Journal of Applied Mathematics, 88(6), 917-958. https://doi.org/10.1093/imamat/hxae006
Fulco, S., Budzik, M. K. & Turner, K. (2026). Tailoring toughness and adhesion through architected interfaces. npj Metamaterials, 2, 1-10. Artikel 5. https://doi.org/10.1038/s44455-025-00014-5
Barvenik, K., Coogan, Z., Librandi, G., Pezzulla, M. & Tubaldi, E. (2024). Tactile Sensing and Grasping Through Thin-Shell Buckling. Advanced Intelligent Systems , 6(9), Artikel 2300855. https://doi.org/10.1002/aisy.202300855
Manti, S., Tsai, P.-H., Lucantonio, A. & Iliescu, T. (2025). Symbolic regression of data-driven reduced order model closures for under-resolved, convection-dominated flows. Journal of Computational Physics, 540, Artikel 114298. https://doi.org/10.1016/j.jcp.2025.114298
De Cunto, L. O., Sadik, S. & Kirkegaard, P. H. (2024). Surrogate modeling of springback in thermoformed foam cores. Poster-session præsenteret på The 19th European Mechanics of Materials Conferences (EMMC), Madrid, Spanien.
Manti, S., Mohammadian, S., Treiber, M. & Lucantonio, A. (2025). SR-Traffic: Discovering Macroscopic Traffic Flow Models with Symbolic Regression. 1-7. https://ml4physicalsciences.github.io/2025/files/NeurIPS_ML4PS_2025_105.pdf
Calafà, M., Jensen, H. M. & Andriollo, T. (2025). Solving plane crack problems via enriched holomorphic neural networks. Engineering Fracture Mechanics, 322, Artikel 111133. https://doi.org/10.1016/j.engfracmech.2025.111133
Paraskevoulakos, C., Ghosh, S., Andriollo, T. & Michel, A. (2024). Sensitivity Study Using Synthetic 3D Image Datasets to Investigate the Effect of Noise Artefacts on Digital Volume Correlation. Experimental Mechanics, 64(5), 595-624. https://doi.org/10.1007/s11340-024-01046-0
Bardella, L. & Jensen, H. M. (2025). Preface: Thematic session SM12 on Plasticity, Viscoplasticity and Creep of the 26th International Congress of Theoretical and Applied Mechanics (ICTAM2024). International Journal of Solids and Structures, 322, Artikel 113624. https://doi.org/10.1016/j.ijsolstr.2025.113624
Paggi, M. & Aghababaei, R. (2025). Preface: Contact Mechanics and Tribology in the ICTAM Century. International Journal of Solids and Structures, 323, Artikel 113642. https://doi.org/10.1016/j.ijsolstr.2025.113642
Won, J., Bae, J., Kim, H., Kim, T., Nemati, N., Choi, S., Jung, M. C., Kim, S., Choi, H., Kim, B., Jin, D., Kim, M., Han, M. J., Kim, J. Y. & Shim, W. (2023). Polytypic Two-Dimensional FeAs with High Anisotropy. Nano Letters, 23(23), 11057-11065. https://doi.org/10.1021/acs.nanolett.3c03324
Darki, A. A., Madsen, S. P. & Dantan, A. R. (2022). Polarization-independent optical spatial differentiation with a doubly-resonant one-dimensional guided-mode grating. Optics Express, 30(3), 3962-3972. https://doi.org/10.1364/OE.450981
Movassagh-Alanagh, F., Abdollah-zadeh, A., Alizadeh Zolbin, M., Nemati, N. & Aghababaei, R. (2023). Plasma-enhanced chemical vapor deposition of TiB2 and TiBN hard coatings using BBr3. Tribology International, 179, Artikel 108137. https://doi.org/10.1016/j.triboint.2022.108137
Calafà, M., Hovad, E., Engsig-Karup, A. P. & Andriollo, T. (2024). Physics-Informed Holomorphic Neural Networks (PIHNNs): Solving 2D linear elasticity problems. Computer Methods in Applied Mechanics and Engineering, 432, Artikel 117406. https://doi.org/10.1016/j.cma.2024.117406
Garg, H., Ledda, P. G., Skov Pedersen, J. & Pezzulla, M. (2024). Passive Viscous Flow Selection via Fluid-Induced Buckling. Physical Review Letters, 133(8), Artikel 084001. https://doi.org/10.1103/PhysRevLett.133.084001
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Particle Flow and Printing Path Effects in SLS. Abstract fra EPF European Polymer Congress, Groningen, Holland.
Paggetti, F., Gherardini, M., Lucantonio, A. & Cipriani, C. (2025). Optimizing the Myokinetic Interface: A Finite Element Model to Predict Displacement in Amputated Muscles. I 2025 International Conference on Rehabilitation Robotics, ICORR 2025 (s. 376-381). IEEE Computer Society Press. https://doi.org/10.1109/ICORR66766.2025.11063137
Traistaru, O. T. L., Shyam, P., Christensen, M. & Madsen, S. P. (2022). Optimizing the energy product of exchange-coupled soft/hard Zn0.2Fe2.8O4/SrFe12O19magnets. Journal of Applied Physics, 132(16), Artikel 163904. https://doi.org/10.1063/5.0103242
Darki, A. A., Dantan, A., Nygaard, J. V., Madsen, S. P., Parthenopoulos, A., Toft-Vandborg, C. & Vandborg, C. (2022). Optical spatial differentiation with ultrathin freestanding subwavelength gratings. I P. Schelkens & T. Kozacki (red.), Optics, Photonics and Digital Technologies for Imaging Applications VII Artikel 121380D SPIE - International Society for Optical Engineering. https://doi.org/10.1117/12.2621186
Ma, L. & Aghababaei, R. (2023). On the Uniqueness of Wear Coefficient for Abrasive Wear at Nanoscale. Journal of Tribology, 145(6), Artikel 062101. https://doi.org/10.1115/1.4062099
Zhu, J. & Aghababaei, R. (2023). On the size effect in scratch and wear response of single crystalline copper. Tribology International, 186, Artikel 108573. https://doi.org/10.1016/j.triboint.2023.108573
Nasr Saleh, M., Budzik, M. K., Saeedifar, M., Zarouchas, D. & Teixeira de Freitas, S. (2022). On the influence of the adhesive and the adherend ductility on mode I fracture characterization of thick adhesively-bonded joints. International Journal of Adhesion and Adhesives, 115, Artikel 103123. https://doi.org/10.1016/j.ijadhadh.2022.103123
Ma, L. & Aghababaei, R. (2022). On the Effect of Adhesive Strength and Scratching Depth on Material Transfer During Nanoscale Scratching. Tribology Letters, 70(1), Artikel 26. https://doi.org/10.1007/s11249-021-01558-z
Zhu, J., Li, X., Zhou, Q. & Aghababaei, R. (2022). On the anisotropic scratching behavior of single crystalline copper at nanoscale. Tribology International, 175, Artikel 107794. https://doi.org/10.1016/j.triboint.2022.107794
Rao, S., Budzik, M. K. & Dias, M. A. (2022). On microscopic analysis of fracture in unidirectional composite material using phase field modelling. Composites Science and Technology, 220, Artikel 109242. https://doi.org/10.1016/j.compscitech.2021.109242
E.F. Athanasiadis, A., Budzik, M. K., Fernando, D. & Dias, M. A. (2024). On micropolar elastic foundations. European Journal of Mechanics A - Solids, 105, Artikel 105277. https://doi.org/10.1016/j.euromechsol.2024.105277
Langthjem, M. A. & Jensen, H. M. (2024). On matched asymptotic expansion solutions of a bucklewave propagation problem. Zeitschrift fuer Angewandte Mathematik und Mechanik, 104(5), 1. Artikel e202300655. https://doi.org/10.1002/zamm.202300655
Sadik, S., Walker, M. G. & Dias, M. A. (2022). On local kirigami mechanics II: Stretchable creased solutions. Journal of the Mechanics and Physics of Solids, 161, Artikel 104812. https://doi.org/10.1016/j.jmps.2022.104812
Zheng, W., Ma, L., Pei, S. & Aghababaei, R. (2024). Numerical assessment of transition in cutting mode and its effect on roughness creation. International Journal of Mechanical Sciences, 261, Artikel 108666. https://doi.org/10.1016/j.ijmecsci.2023.108666
Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Artikel 109782. https://doi.org/10.1007/s00170-025-15061-5
Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2025). Numerical analysis of fatigue crack propagation using a coarse-grained molecular dynamics approach. International Journal of Solids and Structures, 311, Artikel 113245. https://doi.org/10.1016/j.ijsolstr.2025.113245
Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract fra EPF European Polymer Congress, Groningen, Holland.
Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024). Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study. Composites Science and Technology, 251, Artikel 110578. https://doi.org/10.1016/j.compscitech.2024.110578
Taffetani, M. & Pezzulla, M. (2025). Nonlinear morphoelastic energy based theory for stimuli responsive elastic shells. ArXiv.
Sadik, S. & Yavari, A. (2024). Nonlinear anisotropic viscoelasticity. Journal of the Mechanics and Physics of Solids, 182, Artikel 105461. https://doi.org/10.1016/j.jmps.2023.105461
Li, W., Negahban, M., Zhang, W., Zhang, L. & Zhu, J. (2025). Network yield and detangling as a tool for modeling back-stress network softening: A thermodynamically consistent model for polycarbonate. International Journal of Engineering Science, 215, Artikel 104322. https://doi.org/10.1016/j.ijengsci.2025.104322
Andriollo, T. (2022). Network science approach to predict the yield strength of metals containing soft particles and pores. I O P Conference Series: Materials Science and Engineering, 1249, Artikel 012018. https://doi.org/10.1088/1757-899X/1249/1/012018
Andriollo, T., Kouznetsova, V. & Alessandretti, L. (2022). Network approach for the analysis of the irreversible deformation of solids with soft heterogeneities. Physical Review Materials, 6(11), Artikel L110601 . https://doi.org/10.1103/PhysRevMaterials.6.L110601
Mitra, T., singh, G., Darki, A. A., Madsen, S. P. & Dantan, A. R. (2024). Narrow-linewidth Fano microcavities with resonant subwavelength grating mirror. Optics Express, 32(9), 15667-15679. https://doi.org/10.1364/OE.521329
Spangsberg, E., Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Multiscale Modelling of Heat Transfer in Selective Laser Sintering. engrXiv. https://doi.org/10.31224/4704
Mirian, M. H., Silani, M., Akbarzadeh, S. & Aghababaei, R. (2026). Multi-objective optimization of AlCrN coated carbide cutting tools for stress and temperature reduction. Journal of Manufacturing Processes, 158, 205-217. https://doi.org/10.1016/j.jmapro.2025.12.062

Viser resultater 1 til 50 ud af 126

1

2

3

Næste

Revideret 13.11.2025
-
AU Engineering