Publications by Mechanics and Materials

Are you looking for publications by Mechanics and Materials? On this page you can find all the publications made by the Mechanics and Materials - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

van Innis, C., Budzik, M. K. & Pardoen, T. (2025). Bridging in co-cured composite joints. International Journal of Solids and Structures, 309, Artikel 113194. https://doi.org/10.1016/j.ijsolstr.2024.113194

Airao, J., Malekan, M., Budzik, M. & Aghababaei, R. (2024). Effect of Friction on Critical Cutting Depth for Ductile-Brittle Transition in Material Removal Mechanism. Journal of Tribology, 146(11), Artikel 114201 EN. https://doi.org/10.1115/1.4066052

Lubineau, G., Alfano, M., Tao, R., Wagih, A., Yudhanto, A., Li, X., Almuhammadi, K., Hashem, M., Hu, P., Mahmoud, H. A. & Oz, F. (2024). Harnessing Extrinsic Dissipation to Enhance the Toughness of Composites and Composite Joints: A State-of-the-Art Review of Recent Advances. Advanced Materials, 36(51), Artikel 2407132. https://doi.org/10.1002/adma.202407132

Hund, J., Kouznetsova, V. & Andriollo, T. (2025). Efficient prediction of strength and strain localisation in porous solids via microstructure-based limit analysis. Mechanics of Materials, 201, Artikel 105208. https://doi.org/10.1016/j.mechmat.2024.105208

Airao, J., Gupta, A., Nirala, C. K. & Hsue, A. W. J. (2024). Bayesian neural networks modeling for tool wear prediction in milling Al 6061 T6 under MQL conditions. International Journal of Advanced Manufacturing Technology, 135(5-6), 2777-2788. https://doi.org/10.1007/s00170-024-14678-2

Calafà, M. (2024). Characterization of the angular coefficient method on 2D and 3D piecewise smooth boundaries. Computational and Applied Mathematics, 43(8), Artikel 450. https://doi.org/10.1007/s40314-024-02969-z

Bae, J., Won, J., Kim, T., Choi, S., Kim, H., Oh, S. H. V., Lee, G., Lee, E., Jeon, S., Kim, M., Do, H. W., Seo, D., Kim, S., Cho, Y., Kang, H., Kim, B., Choi, H., Han, J., Kim, T. ... Shim, W. (2024). Cation-eutaxy-enabled III–V-derived van der Waals crystals as memristive semiconductors. Nature Materials, 23(10), 1402-1410. https://doi.org/10.1038/s41563-024-01986-x

Malekan, M., Ilvig, C. F. & Aghababaei, R. (2024). Effects of Edge Radius and Coating Thickness on the Cutting Performance of AlCrN-Coated Tool. International Journal of Precision Engineering and Manufacturing, 25(10), 2059-2075. https://doi.org/10.1007/s12541-024-01074-9

Islam, R., Vero, K. & Borah, J. P. (2024). Historical overview and recent advances in permanent magnet materials. Materials Today Communications, 41, Artikel 110538. https://doi.org/10.1016/j.mtcomm.2024.110538

Calafà, M., Hovad, E., Engsig-Karup, A. P. & Andriollo, T. (2024). Physics-Informed Holomorphic Neural Networks (PIHNNs): Solving 2D linear elasticity problems. Computer Methods in Applied Mechanics and Engineering, 432, Artikel 117406. https://doi.org/10.1016/j.cma.2024.117406

Ghasemi, A., Sadough Vanini, S. A., Alizadeh Zolbin, M. & Aghababaei, R. (2024). Exploring the influence of ultrasonic peening treatment at ambient and cryogenic conditions on the surface characteristics and fatigue life of austenitic stainless steel 304L. Surface and Coatings Technology, 494(Part 1 ), Artikel 131382. https://doi.org/10.1016/j.surfcoat.2024.131382

Hu, P., Dias, M. A. & Budzik, M. K. (2024). Geometric tunability of interlaminar resistance. Composites Part B: Engineering, 287, Artikel 111839. https://doi.org/10.1016/j.compositesb.2024.111839

Sahli, R., Mikkelsen, J., Boye, M. S., Dias, M. A. & Aghababaei, R. (2024). Frictional Contact of Soft Polymeric Shells. Physical Review Letters, 133(10), Artikel 106202. https://doi.org/10.1103/PhysRevLett.133.106202

singh, G., Mitra, T., Madsen, S. P. & Dantan, A. R. (2024). Highly reflective and high-Q thin resonant subwavelength gratings. Journal of Physics: Photonics, 6(4), Artikel 045009. https://doi.org/10.1088/2515-7647/ad70e7

Anand, M., Panigrahi, S., Kofoed, M. V. W., Aghababaei, R. & Agarwala, S. (2024). Bioinspired poly(vinyl alcohol) films with tunable adhesion and self-healing for biodegradable electronics and beyond. Sustainable Materials and Technologies, 41, Artikel e01084. https://doi.org/10.1016/j.susmat.2024.e01084

Khanna, N., Patel, D., Raval, P., Airao, J., Badheka, V. & Rahman Rashid, R. A. (2024). Comparison of sustainable cooling/lubrication strategies for drilling of wire arc additively manufactured Inconel 625. Tribology International, 200, Artikel 110068. https://doi.org/10.1016/j.triboint.2024.110068

Garg, H., Ledda, P. G., Skov Pedersen, J. & Pezzulla, M. (2024). Passive Viscous Flow Selection via Fluid-Induced Buckling. Physical Review Letters, 133(8), Artikel 084001. https://doi.org/10.1103/PhysRevLett.133.084001

Truong, T. T., Airao, J., Hojati, F., Ilvig, C. F., Azarhoushang, B., Karras, P. & Aghababaei, R. (2024). Data-driven prediction of tool wear using Bayesian regularized artificial neural networks. Measurement: Journal of the International Measurement Confederation, 238, Artikel 115303. https://doi.org/10.1016/j.measurement.2024.115303

Dias, M. A., E.F. Athanasiadis, A., N. Fernando, D. & Budzik, M. K. (2024). Damage propagation in Architected-Interfaces. 1. Abstract fra American Physical Society March Meeting 2024, Minneapolis , Minnesota, USA. https://meetings.aps.org/Meeting/MAR24/Session/Q35.10

Barvenik, K., Coogan, Z., Librandi, G., Pezzulla, M. & Tubaldi, E. (2024). Tactile Sensing and Grasping Through Thin-Shell Buckling. Advanced Intelligent Systems , 6(9), Artikel 2300855. https://doi.org/10.1002/aisy.202300855

Airao, J., Jain, A., Nirala, C. K. & Unune, D. (2025). Tribological performance in micro-milling of Ti6Al4V under nanofluid-based minimum quantity lubrication. International Journal on Interactive Design and Manufacturing, 19(3), 1807-1819. https://doi.org/10.1007/s12008-024-01856-5

Ma, L., Nemati, N., Kim, D. E. & Aghababaei, R. (2024). Interface Amorphization Controls Maximum Wear Resistance of Multinanolayer DLC/WC Coatings. ACS Applied Materials and Interfaces, 16(14), 18090-18098. https://doi.org/10.1021/acsami.3c18218

Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024). Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study. Composites Science and Technology, 251, Artikel 110578. https://doi.org/10.1016/j.compscitech.2024.110578

Hansen, J. G. & de Figueiredo, R. P. (2024). Active Object Detection and Tracking Using Gimbal Mechanisms for Autonomous Drone Applications. Drones, 8(2), Artikel 55. https://doi.org/10.3390/drones8020055

Zhu, J., Xiao, J., Zhou, Q. & Aghababaei, R. (2024). Effect of grain boundary on scratch behavior of polycrystalline copper. International Journal of Mechanical Sciences, 272, Artikel 109175. https://doi.org/10.1016/j.ijmecsci.2024.109175

Sivebaek, I. M., Aghababaei, R. & Espallargas, N. (2024). Editorial: Selected papers from NORDTRIB 2022. Wear, 544-545, Artikel 205183. https://doi.org/10.1016/j.wear.2023.205183

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra tough architected joints through single manufacturing step. Abstract fra 9th International Conference on Fracture of Polymers, Composites and Adhesives, Schweiz.

Paraskevoulakos, C., Ghosh, S., Andriollo, T. & Michel, A. (2024). Sensitivity Study Using Synthetic 3D Image Datasets to Investigate the Effect of Noise Artefacts on Digital Volume Correlation. Experimental Mechanics, 64(5), 595-624. https://doi.org/10.1007/s11340-024-01046-0

Manti, S. & Lucantonio, A. (2024). Discovering interpretable physical models using symbolic regression and discrete exterior calculus. Machine Learning: Science and Technology, 5(1), Artikel 015005. https://doi.org/10.1088/2632-2153/ad1af2

Nitschke, I., Sadik, S. & Voigt, A. (2024). Tangential Tensor Fields on Deformable Surfaces – How to Derive Consistent L²-Gradient Flows. IMA Journal of Applied Mathematics, 88(6), 917-958. https://doi.org/10.1093/imamat/hxae006

E.F. Athanasiadis, A., Budzik, M. K., Fernando, D. & Dias, M. A. (2024). On micropolar elastic foundations. European Journal of Mechanics A - Solids, 105, Artikel 105277. https://doi.org/10.1016/j.euromechsol.2024.105277

Bokharaie, B.-U., Aghababaei, R., Dias, M. A. & Budzik, M. K. (2024). Failure of 3D-printed composite continuous carbon fibre hexagonal frames. Composites Part B: Engineering, 275, Artikel 111307. https://doi.org/10.1016/j.compositesb.2024.111307

Sadik, S. & Yavari, A. (2024). Nonlinear anisotropic viscoelasticity. Journal of the Mechanics and Physics of Solids, 182, Artikel 105461. https://doi.org/10.1016/j.jmps.2023.105461

Langthjem, M. A. & Jensen, H. M. (2024). On matched asymptotic expansion solutions of a bucklewave propagation problem. Zeitschrift fuer Angewandte Mathematik und Mechanik, 104(5), 1. Artikel e202300655. https://doi.org/10.1002/zamm.202300655

Mitra, T., singh, G., Darki, A. A., Madsen, S. P. & Dantan, A. R. (2024). Narrow-linewidth Fano microcavities with resonant subwavelength grating mirror. Optics Express, 32(9), 15667-15679. https://doi.org/10.1364/OE.521329

Fulco , S., Budzik, M. K. & T. Turner , K. T. (2024). Enhancing toughness through geometric control of the process zone. Journal of the Mechanics and Physics of Solids, 184, Artikel 105548. https://doi.org/10.1016/j.jmps.2024.105548

Islam, R., Madsen, S. P. & Christensen, M. (2024). Exploring the magnetic properties of W-type SrFe18O27 hexaferrite: Insights from a first-principles study. Physical Review B, 109(2), Artikel 024414. https://doi.org/10.1103/PhysRevB.109.024414

Won, J., Bae, J., Kim, H., Kim, T., Nemati, N., Choi, S., Jung, M. C., Kim, S., Choi, H., Kim, B., Jin, D., Kim, M., Han, M. J., Kim, J. Y. & Shim, W. (2023). Polytypic Two-Dimensional FeAs with High Anisotropy. Nano Letters, 23(23), 11057-11065. https://doi.org/10.1021/acs.nanolett.3c03324

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra-tough architected adhesive joints for integrated composite processing and bonding. Composites Part A: Applied Science and Manufacturing, 177, Artikel 107949. https://doi.org/10.1016/j.compositesa.2023.107949

Gao, X., Zhang, Y., Haahr-Lillevang, L., Vedel-Smith, N. K. & Andriollo, T. (2023). 3D strain pattern in additively manufactured AlSi10Mg from digital volume correlation. Heliyon, 9(12), Artikel e23186. https://doi.org/10.1016/j.heliyon.2023.e23186

L.S. Hedvard, M., Dias, M. A. & Budzik, M. K. (2024). Toughening mechanisms and damage propagation in Architected-Interfaces. International Journal of Solids and Structures, 288, Artikel 112600. https://doi.org/10.1016/j.ijsolstr.2023.112600

Abu Shaid Sujon, M., Andriollo, T. & Islam, A. (2023). Enhancing vibration damping properties of MABS/VDT blends using SEBS‑g‑MAH as a compatibilizer. Journal of Polymer Research, 30(12), Artikel 440. https://doi.org/10.1007/s10965-023-03819-y

Vero, K., Islam, R. & Borah, J. P. (2023). First-principles study on the enhancement of structure stability and magnetocrystalline anisotropy energy of L1₀-ordered Mn_1−xFe_xAlC compound for permanent magnet application. Journal of Applied Physics, 134(15), Artikel 153902. https://doi.org/10.1063/5.0172356

Zheng, W., Ma, L., Pei, S. & Aghababaei, R. (2024). Numerical assessment of transition in cutting mode and its effect on roughness creation. International Journal of Mechanical Sciences, 261, Artikel 108666. https://doi.org/10.1016/j.ijmecsci.2023.108666

Ma, L. & Aghababaei, R. (2023). On the Uniqueness of Wear Coefficient for Abrasive Wear at Nanoscale. Journal of Tribology, 145(6), Artikel 062101. https://doi.org/10.1115/1.4062099

Jensen, J. S. K. & Aghababaei, R. (2023). Experimental investigation of three-body wear for rubber seals in abrasive slurry environment. Wear, 534-535, Artikel 205131. https://doi.org/10.1016/j.wear.2023.205131

Nemati, N., Manhard, A., Greuner, H., Hunger, K., Böswirth, B., Visca, E. & You, J. H. (2023). Microstructural evolution of tungsten under thermal loads: A comparative study between cyclic high heat flux loading and isochronous furnace heating. Nuclear Materials and Energy, 36, Artikel 101465. https://doi.org/10.1016/j.nme.2023.101465

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2023). Ultra tough architected joints through single step bonding process with tunable properties. 205. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.

Dias, M. A., Athanasiadis, A., Fernando, D. N. & Budzik, M. K. (2023). Micromechanics of architected interfaces. 73. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.

Budzik, M. K., Dias, M. A., Hedvard, M. & Athanasiadis, A. (2023). Failure of architected interfaces. 47. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.

Viser resultater 51 til 100 ud af 133

Forrige

Næste

Back to the main page

Revideret 13.11.2025

AU Engineering