Find

For students
For PhDs
For employees

Department of Mechanical and Production Engineering

Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Aliana, A., Chang, M., Østergaard, P. A., Victoria, M. & Andersen, A. N. (2022). Performance assessment of using various solar radiation data in modelling large-scale solar thermal systems integrated in district heating networks. Renewable Energy, 190, 699-712. https://doi.org/10.1016/j.renene.2022.03.163

Ali, A., Muqeet, H. A., Khan, T., Hussain, A., Waseem, M. & Niazi, K. A. K. (2023). IoT-Enabled Campus Prosumer Microgrid Energy Management, Architecture, Storage Technologies, and Simulation Tools: A Comprehensive Study. Energies, 16(4), Article 1863. https://doi.org/10.3390/en16041863

Alessi, C., Falotico, E. & Lucantonio, A. (2023). Ablation Study of a Dynamic Model for a 3D-Printed Pneumatic Soft Robotic Arm. IEEE Access, 11, 37840-37853. https://doi.org/10.1109/ACCESS.2023.3266282

Alamia, A. & Bruun Andresen, G. (2023). Power-to-X integration in biogas plants: industrial symbiosis and cost-optimal production of hydrogen and e-methanol: won a best poster award. Poster session presented at Retrospect: GreenLab Summit 2023, Skive, Denmark.

Alamia, A. & Bruun Andresen, G. (2024). Modelling Alternatives for integrted PtX infrastrcture between Denmark and EU. Poster session presented at 12th European Open Energy Modelling Workshop, Grenoble, France.

Alamia, A., Partoon, B., Rattigan, E. & Bruun Andresen, G. (2024). Optimizing hydrogen and e-methanol production through Power-to-X integration in biogas plants. Energy Conversion and Management, 322, Article 119175. https://doi.org/10.1016/j.enconman.2024.119175

Alamia, A., Ambrose, H. W. & Rattigan, E. (2025). Techno-Economic Integration of Power-to-X Methanation in Biogas Systems: System-Level Optimization Based on Experimental Research. Poster session presented at 33rd European Biomass Conference & Exhibition , Valencia, Spain.

Alameen, E. H. O., Lucantonio, A. & DeSimone, A. (2023). Mechanics and transient morphing of soft hygroscopic bilayers. Mechanics Research Communications, 131, Article 104131. https://doi.org/10.1016/j.mechrescom.2023.104131

Airao, J., Jain, A., Nirala, C. K. & Unune, D. (2025). Tribological performance in micro-milling of Ti6Al4V under nanofluid-based minimum quantity lubrication. International Journal on Interactive Design and Manufacturing, 19(3), 1807-1819. https://doi.org/10.1007/s12008-024-01856-5

Airao, J., Gupta, A., Nirala, C. K. & Hsue, A. W. J. (2024). Bayesian neural networks modeling for tool wear prediction in milling Al 6061 T6 under MQL conditions. International Journal of Advanced Manufacturing Technology, 135(5-6), 2777-2788. https://doi.org/10.1007/s00170-024-14678-2

Airao, J., Malekan, M., Budzik, M. & Aghababaei, R. (2024). Effect of Friction on Critical Cutting Depth for Ductile-Brittle Transition in Material Removal Mechanism. Journal of Tribology, 146(11), Article 114201 EN. https://doi.org/10.1115/1.4066052

Aher, G. R., Boudjadar, J. & Ramanujan, D. (2023). Towards Simulation-Based Circular Product Design. Procedia CIRP, 116, 690-695. https://doi.org/10.1016/j.procir.2023.02.116

Aher, G. R., Macedo, H. D., Larsen, P. G. & Ramanujan, D. (2023). Supporting Design for Circular Economy Using Lifecycle Co-Simulation. In ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Design for Manufacturing and the Life Cycle Conference (DFMLC) Article DETC2023-116537, V005T05A006; American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2023-116537

Aher, G., Sandberg, M., Boudjadar, J. & Ramanujan, D. (2025). Informing circularity-focused design optimization using parametric life-cycle engineering simulation models. Smart and Sustainable Manufacturing Systems, 9(1), 11-36. https://doi.org/10.1520/SSMS20240018

Aher, G. R. (2025). Supporting Design Space Exploration for Circular Product Design. [PhD thesis, Aarhus University].

Aghababaei, R. & Zhao, K. (2021). Micromechanics of material detachment during adhesive wear: A numerical assessment of Archard's wear model. Wear, 476, Article 203739. https://doi.org/10.1016/j.wear.2021.203739

Aghababaei, R., Malekan, M. & Budzik, M. (2021). Cutting Depth Dictates the Transition from Continuous to Segmented Chip Formation. Physical Review Letters, 127(23), Article A202. https://doi.org/10.1103/PhysRevLett.127.235502

Addo-Tenkorang, R., Møller, C. & Chen, K.-L. (2023). Digital Transformation Roadmap for Danish SME Smart Factories: Benefits and Future Research. In International Conference on Smart Business Technologies (pp. 41-60)

Addo-Tenkorang, R., Møller, C. & Chen, K. L. (2023). Industrial Transformation Roadmap for Digitalisation and Smart Factories: The Danish SMEs Model. In S. Hammoudi, F. Wijnhoven & M. van Sinderen (Eds.), Proceedings of the 20th International Conference on Smart Business Technologies, ICSBT 2023 (pp. 144-153). SCITEPRESS Digital Library. https://doi.org/10.5220/0012094300003552

Abu Shaid Sujon, M., Andriollo, T. & Islam, A. (2023). Enhancing vibration damping properties of MABS/VDT blends using SEBS‑g‑MAH as a compatibilizer. Journal of Polymer Research, 30(12), Article 440. https://doi.org/10.1007/s10965-023-03819-y

Abu-Ghaida, H. & Kamari, A. (2021). An alternative approach to material and EPD mapping in the development of BIM-based LCA and LCC tools. In Proceedings of the 38th International Conference of CIB W78, Luxembourg, 13-15 October: Joint Conference CIB W78 - LDAC 2021 (pp. 782-792). Article 78. http://itc.scix.net/paper/w78-2021-paper-078

Abu-Ghaida, H., Leka, S., Kunrath, K., Thostrup, R. & Ramanujan, D. (2021). Økoengineer – A Web-Based Game Platform for Guided Discovery-Based Sustainability Learning in Engineering Curricula. In 18th International Conference on Design Education (DEC): 18th International Conference on Design Education (DEC) (Vol. 4). Article DETC2021-69406, V004T04A014 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-69406

Abkar, M., Zehtabiyan-Rezaie, N. & Iosifidis, A. (2023). Reinforcement learning for wind-farm flow control: Current state and future actions. Theoretical and Applied Mechanics Letters, 13(6), Article 100475. https://doi.org/10.1016/j.taml.2023.100475

Abbiati, G., Gomes, C., Sandberg, M., Kazemi, Z., Hansen, S. T. & Larsen, P. G. (2024). Modelling for Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 89-127). Springer. https://doi.org/10.1007/978-3-031-66719-0_5

Displaying results 501 to 524 out of 524

11

Revised 22.02.2024

-

AU Engineering